Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
Not received when Rx.VOLUME = OFF. (Initial value is ON) * Control Change * When Rx.CONTROL CHANGE = OFF, all control change messages except for Channel Mode messages will be ignored. * The value specified by a Control Change message will not be reset even by a Program Change, etc. O Pan (Controller number 10) Status 2nd bvte 3rd bvte BnH 0AH wH n = MIDI channel number: OH - FH (Ch.1 - 16) w = pan: 00H - 40H - 7FH (Left - Center - Right), O Bank Select (Controller number 0, 32) Initial value = 40H (Center) Status 2nd bvte 3rd bvte BnH 00H mmH * The stereo position can be adjusted over 127 steps. BnH 20H IIH * For Rhythm Parts, this is a relative adjustment of each Instrument’s pan setting. n = MIDI channel number: mm = Bank number MSB: II = Bank number LSB: OH-FH (Ch.1 - 16) 00H - 7FH (GS Variation number 0 - 127), Initial value = 00H 00H - 04H (MAP), Initial value = OOH Not received when Rx.BANK SELECT = OFF. “Rx.BANK SELECT’ is set to OFF by “GM1 System On,” and Bank Select messages will be ignored. Rx.BANK SELECT is set to ON by “GM2 System On." Rx.BANK SELECT is set to ON by power-on reset or by receiving “GS Reset.” When Rx.BANK SELECT LSB = OFF, Bank number LSB (IIH) will be handled as OOH regardless of the received value. However, when sending Bank Select messages, you have to send both the MSB (mmH) and LSB (IIH, the value should be OOH) together. Bank Select processing will be suspended until a Program Change message is received. * Not received when Rx. PANPOT = OFF. (Initial value is ON) O Expression (Controller number 11) Status 2nd bvte 3rd bvte BnH 0BH wH n = MIDI channel number: OH - FH (Ch.1 - 16) vv = Expression: OOH - 7FH (0 - 127), Initial value « 7FH (127) * This adjusts the volume of a Part. It can be used independently from Volume messages. Expression messages are used for musical expression within a performance; e.g., expression pedal movements, crescendo and decrescendo. * Not received when Rx.EXPRESSION = OFF. (Initial value is ON) 1 O Hold 1 (Controller number 64) Status 2nd bvte 3rd bvte BnH 40H wH n = MIDI channel number: OH - FH (Ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) * Not received when Rx.HOLDI = OFF. (Initial value is ON) O Portamento (Controller number 65) Status 2nd bvte 3rd bvte BnH 41H wH O Decay Time (Controller number 75) [VA-76] Status 2nd byte 3rd bvte BnH 4BH wH n = MIDI channel number: OH - FH (Ch.1 - 16) vv = Decay Time value (relative change): 00H - 7FH (-64 - 0 - +63), Initial value = 40H (no change) O Vibrato Rate (Controller number 76) [VA-76] Status 2nd bvte 3rd bvte BnH 4CH wH n = MIDI channel number: OH - FH (Ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF. 64 - 127 = ON * Not received when Rx.PORTAMENTO = OFF. (Initial value is ON) O Sostenuto (Controller number 66) Status 2nd bvte 3rd bvte BnH 42H wH n = MIDI channel number: OH - FH (Ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON n = MIDI channel number. vv = Vibrato Rate value (relative change): O Vibrato Depth (Controller number 77) Status 2nd byte 3rd byte BnH 4DH wH n = MIDI channel number: vv = Vibrato Depth Value (relative change): OH-FH (Ch.1 - 16) ООН - 7FH (-64 - 0 - +63), Initial value = 40H (no change) [VA-76] OH - FH (Ch.1 - 16) ООН - 7FH (-64 - 0 - +63) Initial Value = 40H (no change) Not received when Rx.SOSTENUTO = OFF. (Initial value is ON) О Soft (Controller number 67) Status 2nd bvte 3rd bvte BnH 43H wH n = MIDI channel number: vv = Control value: OH-FH (Ch.1 -16) ООН - 7FH (0 - 127) 0 - 63 = OFF, 64-127 = ON * Not received when Rx.SOFT = OFF. (Initial value is ON) O Hold 2 (Controller number 69) [VA-76] Status 2nd bvte 3rd bvte BnH 45H wH Q Vibrato Delay (Controller number 78) Status 2nd bvte 3rd bvte BnH 4EH wH n = MIDI channel number: OH-FH (Ch.1 - 16) w = Vibrato Delay value (relative change): 00H - 7FH (-64 - 0 - +63), Initial value=40H (no change) O Portamento control (Controller number 84) Status 2nd bvte 3rd bvte BnH 54H kkH n = MIDI channel number: OH - FH (Ch.1 - 16) kk = source note number: 00H - 7FH (0 - 127) [VA-76] n » MIDI channel number: w = Control value: OH-FH (Ch.1-16) 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON * Not received when Rx.SOFT = OFF. (Initial value is ON) O Filter Resonance (Timbre/Harmonic Intensity) (Controller number 71) Status 2nd byte 3rd bvte [VA-76] BnH 47H wH n = MIDI channel number: OH - FH(Ch.1 - 16) w= Resonance value (relative change): 00H - 7FH(-64 - 0 - +63), Initial value * 40H (no change) O Release Time (Controller number 72) Status 2nd bvte 3rd byte BnH 48H wH n = MIDI channel number: OH - FH(Ch.1 - 16) w = Release Time value (relative change): 00H - 7FH (-64 - 0 - +63), Initial value = 40H (no change) [VA-76] A Note-on received immediately after a Portamento Control message will change continuously in pitch, starting from the pitch of the Source Note Number. If a voice i...