Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Items used for connections and operations in this guide s Audio pin cable (x1) s OSD* video pin cable (x1) s Optical cable (x1) s Digital audio pin cable (x1) s IntelliBeam microphone (x1) s Cardboard microphone stand (x1) s Demonstration DVD (x1) *OSD: On-Screen Display YSP-500 QUICK REFERENCE GUIDE This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual. Items used for connections and operations in this guide s Audio pin cable (x1) s OSD* video pin cable (x1) s Optical cable (x1) s Digital audio pin cable (x1) s IntelliBeam microphone (x1) s Cardboard microphone stand (x1) s Demonstration DVD (x1) *OSD: On-Screen Display Connecting external components to this unit2 Connecting external components such as a TV or DVD player to this unit. Connect your TV or DVD player to this unit using appropriate cables as shown below. After all connections are complete, plug the power supply cable into the AC wall outlet. For further information on connecting other components, see pages 16 to 24 in the Owner’s Manual. C2007 All rights reserved.Printed in Malaysia WM28850 [En] R L VCR TV/STB VIDEO TV/STB AUX OPTICAL COAXIAL DIGITAL INPUT OUTAUDIO INPUT DVD SYSTEM CONNECTOR SUBWOOFER 1 2 COAXIAL AUDIO OUTPUT L R VIDEO INPUT ANALOG AUDIO OUTPUT OPTICAL AUDIO OUTPUT L VCR TV/STB VIDEO TV/STB AUX OPTICAL COAXIAL DIGITAL INPUT OUTAUDIO INPUT DVD SYSTEM CONNECTOR SUBWOOFER DVD player TV Decide where to install this unit. Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner. YSP-500 Installing this unit To the AC wall outlet 1 32 Do not plug the power supply cable into an AC wall outlet until all connections are complete. 1 1. Pull out the cap 2. Check the direction This connection example shows a way to connect external components such as a TV or DVD player to this unit by using the supplied cable. You can enjoy the multi-channel audio from the DVD player and the analog/digital audio from the TV. Use the video pin cable supplied with your DVD player to make a video connection between your DVD player and TV. Connect the supplied cables in the following order. If you have connected external components, follow the steps on the backside to start the AUTO SETUP procedure. Continued on the back Video connection 1Audio pin cable (Outputs TV analog audio sounds from this unit) 2 OSD video pin cable (Displays the YSP-500 menu screen on the TV) 3 Optical cable (Outputs TV digital audio sounds from this unit) 4 Digital audio pin cable (Outputs DVD digital audio sounds from this unit) 4 Note Check whether the digital audio output of your TV and DVD player is turned on. Audio connection Subwoofer Optical cable Pull out the cap before connecting the optical cable, and then check the direction to insert the cable. If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry out the AUTO SETUP procedure (see the backside) or select “SWFR” for “BASS OUT” in “SUBWOOFER SET” (see page 62 in the Owner’s Manual). System connection Install this unit using a rack, etc. Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first. For further information on installation, see page 13 in the Owner’s Manual. Install this unit in the exact center of the wall when it is measured from the left and right corners. Install this unit in the corner at a 40° to 50° angle from the adjacent walls. 40° to 50° An object, such as furniture An object, such as furniture Front left channel Center channel Front right channel Surround left channel Surround right channel Front left channel Center channel Front right channel Surround left channel Surround right channel 3Install this unit in the rack. 1Place this unit in front of the rack. 2Connect this unit to your TV and DVD player. y Hint To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor. Note Be careful not to leave scratches on this unit or the rack. 4Installation is completed. The following is an example of installing this unit in a rack. Press ENTER to start the AUTO SETUP procedure, and then leave the room within 10 seconds. The following screen appears on the TV. Leave the room within 10 seconds before the AUTO SETUP procedure starts. The setup screen automatically changes during the AUTO SETUP procedure. When the AUTO SETUP procedure is completed, the following screen appears on the TV. If “ENVIRONMENT CHECK (FAILED) is displayed, see page 36 in the Owner’s Manual and then run the pr...