Assessments - 3, GPA: 4.7
(
)
)
|
Fotos e especificações Yamaha YHT-S401 |
Facilidade de uso
You can also turn off the front panel display to view a movie in a darker environment. The brightness of the front panel changes as follows. Menu: 4:DISPLAY MODE Adjustable range (Default setting: “DIMMER 0”) DIMMER 0 1 DIMMER -1 1 DIMMER -2 1 DIMMER -3 1 DIMMER -4 1 DISPLAY OFF Bright i Dark * Selecting DISPLAY OFF turns off the front panel display after exiting the setup menu. Notes The front panel display lights up momentarily when any operation is performed with DISPLAY OFF mode selected. Only the STATUS indicator remains lit in DISPLAY OFF mode. 19 En Setup menu Using other speakers Menu: 5:SP SETUP You can set the speaker type if you want to add or change speakers. When you connect only the supplied speaker, you do not have to change the setting. ■ Selecting the number of channels and the front speaker type Sub menu: 5-1:SP CHANNEL You can select the number of output speakers. Sub menu: 5-2:SP TYPE You can select the type of front speakers. “BAR”: When you use the unit, either on its own or in addition to other commercially available speakers “BOOK SHELF”: This setting is not used for this system “OTHER”: When you connect commercially available speakers instead of the unit *1: “5-3:SP DISTANCE” setting available *2: “5-4:CROSSOVER” setting available *3: “8:MATRIX DECODE” settings available ■ Setting the distance between the speakers Sub menu: 5-3:SP DISTANCE Select a parameter suited for the distance between the front left and right speakers, to obtain the most suitable surround effect. Available options (Default setting: NORMAL) “WIDE”: When the distance between the front speakers is over 150 cm (59-1/16”). “NORMAL”: When the distance between the front speakers is from 80 cm (31-1/2”) to 150 cm (59-1/16”). “NARROW”: When the distance between the front speakers is within 80 cm (31-1/2”). Notes When the surround mode is off, this setting cannot be made. This setting can be made only when “2CH” or “3CH” is selected in “5-1:SP CHANNEL”. ■ Cutting the crossover register Sub menu: 5-4:CROSSOVER You can set the cutoff frequency output from the built-in subwoofer of this unit according to the specification of the connected speakers. Available options (Default setting: 150Hz) 80Hz, 100Hz, 120Hz, 150Hz, 200Hz 20 En Setup menu Dynamic range control Menu: 7:D.RANGE You can adjust the dynamic range compression. Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion. Available options: AUTO/MIN, STANDARD, MAX (Default setting: MAX) “AUTO/MIN”: (MIN) Adjust the dynamic range for low volume or a quiet environment, such as at night, for playing back bitstream signals except for Dolby TrueHD signals. (AUTO) Adjust the dynamic range based on information from the input signal when playing back Dolby TrueHD signal. “STANDARD”: The dynamic range recommended for regular home use. “MAX”: Outputs sound without adjusting the dynamic range of the input signals. Setting the matrix decode Menu: 8:MATRIX DECODE The matrix decode function expands 2ch stereo sound to surround sound. ■ Selecting the decoder Sub menu: 8-1:DECODE MODE This sub menu is selectable only when “STANDARD” is selected for the surround mode. Available options (Default setting: DOLBY PLII) DOLBY PLII, Neo:6 Cinema, Neo:6 Music ■ Adjusting the center image Sub menu: 8-2:C.IMAGE Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary. This is adjustable only when “Neo:6 Music” is selected in “8-1:DECODE MODE”. Adjustable range (Default setting: 0.3) 0.0 to 1.0 21 En Settings for each input source (Option menu) Input OPTION TV/STB HDWT-3 ANALGG/FM USB " o o o o (mm) —(X\ (iHFO) NINE PRESET —( v/ (setup) FOLDER üüD Œt ( ENIEr) ( frW ) 1 s RETURN —ÇD Œ) œI ENTER 1 2 Press input button to select the desired input to change the setting. Press OPTION to enter option menu. The option menu is displayed in the front panel display. Option menu items The following menu items are provided for each input. Input Menu item TV/STB/ ANALOG 1.VOLUME TRIM 2.AUDIO DELAY HDMI1-3 3.AUDIO ASSIGN FM 2.AUTO PRESET 3.CLEAR PRESET 4. STEREO/MON O 5.TRAFFIC PROG*1 USB 2.REPEAT 3.SHUFFLE*2 *1 See the page 13 for details. *2 See the page 17 for details. 3 Press to select the menu and press ENTER. 4 Press to change the setting value and press ENTER. 5 Press OPTION to exit the option menu. Press RETURN to return to the previous menu. The option menu items are listed below. These settings are applied to the currently selected input source. Adjusting input level of each jack (VOLUME TRIM) Menu: 1.VOLUME TRIM Adjust the input level for each jack to compensate for variations in volume between different input devices. Adjustable range: -6 to +6 (Default setting: 0) Adjusting the audio delay ...