Assessments - 4, GPA: 3.8
(
)
)
|
Fotos e especificações Yamaha NS-P20 |
Facilidade de uso
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. English ii En Contents Package contents................................................1 Connecting the speakers..................................3 Installing the speakers.......................................1 Connection diagram.............................................3 Installing the front, center, and surround Connecting the power cables ..............................4 speakers ...........................................................2 Using the Subwoofer ......................................... 4 Installing the subwoofer.......................................2 Setting the subwoofer volume .............................4 Wall-mounting the speakers................................2 Troubleshooting ................................................. 5 Specifications...................................................... 6 Package contents Make sure the package contains the following items. Speaker cable 25 m (82 ft.) x1 (To be cut into 5 lengths for the front, center, and surround speakers. Take care to prevent injury when preparing the cables.) Subwoofer cable 5 m (16 ft.) x1 Non-skid pads (24 pcs.) x1 (For the front, center and surround speakers. Including 4 spare non-skid pads.) Subwoofer (NS-SW20) x1 Center speaker (NS-C20) x1 Non-skid pads: When placing the speakers on a flat surface, affix the included non-skid pads to the corners of the speaker undersides, as shown. The pads will prevent the speaker from moving around. Non-skid pad Front and surround speakers (NS-B20) x4 Installing the speakers • Before you connect the speakers, place each speaker in its respective location. Speaker positioning is very important as it affects the overall sound quality of the system. Place the speakers in locations that will optimize the sound quality at your listening position. Refer to the illustration. The position of the subwoofer is not as critical as the position of the other speakers because sub-bass sounds are not very directional. Refer to “Installing the subwoofer” on page 2 for more information. Note • Placing the speakers too close to a CRT-type TV may impair the picture color or cause a buzzing noise. In this case, move the speakers at least 20 cm (8") away from the TV. This is not an issue with LCD and plasma TVs. Center Front right Subwoofer Surround left Front left Surround right 1 En Installing the speakers Installing the front, center, and surround speakers Front speakers: Place the two front speakers on the left and right sides of the TV facing directly forward. Surround speakers: Place the left and right surround speakers behind your listening position, facing slightly inward. The front and surround speakers can be placed on a flat surface or wall- mounted. See “Wall-mounting the speakers” for more information. Center speaker: Place the center speaker centrally between the front speakers, facing directly forward. Installing the subwoofer Place the subwoofer on the outside of either the right or the left front speaker, as shown in A and B. Subwoofer Front speaker A B C Note: Standing waves may make it difficult to hear bass sounds here. The placement shown in C is also possible, however, if the subwoofer is placed directly facing a wall and your listening position is in the center of the room, you may not be able to obtain enough bass sound from the subwoofer. This is because “standing waves” are forming between the two parallel walls and cancelling out the bass sounds. In this case, position the subwoofer at an angle to the wall. It may be necessary to break up parallel wall surfaces by placing bookshelves, etc., along them. Wall-mounting the speakers You can mount the speakers on the wall as follows. 1 Install screws into a solid wall or wall support as shown below. Use 3.5 to 4 mm (1/8") diameter self-tapping screws. 2 Hang each speaker by its keyhole slots onto the protruding screws. Note • Make sure the shaft of the screw is seated in the narrow part of the ke...
Este manual também é adequado para os modelos :Home theater - YHT-296 (2.02 mb)
Home theater - YHT-298 (2.02 mb)