Assessments - 6, GPA: 3.3
(
)
)
|
Facilidade de uso
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION FEA TURES CONTENTS FEA TURES CONTENTS . Home Theater Sound Connecting this system to the AV-S70 (sold separately) allows you to enjoy the power of low bass sounds plus surround effects. . Centralized Control with the AV-S70 (sold separately) The AV-S70 is used to do things such as adjust the subwoofer level and adjust the speaker level using test tones. Refer to the AV-S70 (sold separately) owner’s manual. . Advanced YST v This subwoofer incorporates advanced YAMAHA Active Servo Technology to achieve superior bass reproduction. FEATURES .................................................................. 1 SPEAKER PLACEMENT .......................................... 2 USING THE SPEAKER MOUNTING BRACKETS ...................................... 3 CONNECTIONS .......................................................... 5 TROUBLESHOOTING .............................................. 8 SPECIFICATIONS ...................................................... 9 yindicates a tip for your operation. Checking the Package Contents Check that the following accessories are included in the package. Speaker cords (15 m x 2) System connector cable (3 m) Connection guide Speaker mounting brackets Type A brackets (x 2) (wall brackets) Type B brackets (x 2) Screws (x 2) Wing nuts (x 2) 1 English SPEAKER PLACEMENT SPEAKER PLACEMENT AV-S70 (sold separately) Place above the monitor in the center. Subwoofer Left rear speaker Rear speakers Place behind or to the sides of the listening position. Right rear speaker 1.8 m n Subwoofer Place the subwoofer at the either right or left side of the front speaker unit and facing slightly toward the center of the room so that the sound from it and the sound reflected by the wall should not cancel out each other. Try altering the position of the subwoofer versus the listening position as the relative position will affect the way the bass sounds. n Rear speakers Depending on room conditions, it is possible to place rear speakers on shelves or hang them on the wall. Speakers should be placed about 1.8 m above the floor. n AV-S70 (sold separately) Place the AV-S70 on top of the television and align the front surface of the speakers with the front surface of the television monitor. For details on placement, refer to the AV-S70 owner’s manual. If the system cannot be placed on top of the television, place it on a rack beneath the television as close to the television monitor as possible. About 1.8 m USING THE SPEAKER MOUNTING BRACKETS USING THE SPEAKER MOUNTING BRACKETS Use the provided type A wall brackets when hanging the rear speakers on a wall. 1Attach two commercially available wood screws (diameter about 4 mm) in the location on the wall where the rear speaker is to be hung, and then mount the bracket on the wood screws. Check that the wood screws are secure inside the narrow portion of the holes in the bracket. 20 mm or more 65 mm Type A bracket 2Attach the speaker to the bracket using the provided wing nut. Wing nut (provided) 3Adjust the angle of the speaker and then tighten the wing nut. ¦ To mount speakers directly to the wall It is possible to hang the speakers directly on the wall without using the type A brackets by attaching two wood screws to the wall and then using the holes on the rear panel of the speakers for direct attachment. Wood screws having a diameter of about 4 to 5 mm (commercially available) 65 mm 65 mm 5 mm 20 mm or more Note • After mounting, check that the speakers are attached securely. ¦ YAMAHA speaker stand SPS-AV1 (sold separately) The rear speakers can also be attached to SPS-AV1 speaker stands and used as floor stand speakers. English 3 USING THE SPEAKER MOUNTING BRACKETS USING THE SPEAKER MOUNTING BRACKETS Using Commercially Available Speaker Stands (distance between screw holes: 60 mm) 1Attach the type B brackets to the bottom of the speakers using the provided screws. Align so that the protrusion on the bracket goes into the groove on the bottom of the speaker. Provided screw Type B bracket 2Mount the speaker on the speaker stand using the bracket holes (spaced at 60 mm). Be sure to ready the small screws (diameter: 4 mm, length: 8 mm), spring washers and washers. 60 mm CAUTION Be sure to read these important precautions. • Each speaker weighs approximately 0.7 kg. Select a firm wall or pillar to attach screws to. Do not attach screws to material such as mortar or veneer as screws may come loose easily, causing the speaker to fall. • Do not mount speakers using nails or tape as vibrations during operation may cause nails to come loose or tape to peel off, causing the speaker to fall. • Take care that the speaker cord is not pinched between the speaker and the bracket. Be sure that the speaker cord passes through the groove on the rear panel of the speaker. • Secure the speaker cords so that they will not catch on hands or feet, causing speakers to drop. • Be ...