Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Priority order of video sources: 1) VCR/TAPE 2 , 2) LD/TV. . If you select LD/TV, TUNER, CD or PHONO, be sure that TAPE 1 and/or VCR/TAPE 2 are not being selected. . If you select TAPE 1 and VCR/TAPE 2, and another input selector at the same time, the result will be the visual of VCR/TAPE 2 and the sound from TAPE 1. . If you select both LD/TV and TAPE 1 at the same time, the result will be the visual of LD/TV and the sound from TAPE 1. . Once you play the LD player, its visual will not be interrupted even if other input selectors except VCR/TAPE 2 are selected. ENGLISH 1,4 2 TO RECORD A SOURCE TO TAPE Notes . VOLUME, BASS, TREBLE, BALANCE and LOUDNESS control settings have no effect on the material being recorded. . To dub from tape to tape, only the following one way of dubbing can be performed. Note that when dubbing is performed from a VCR to an audio tape deck, only audio signals of the VCR will be dubbed to the audio tape deck. 1 * * Select the source to be recorded. To dub from tape to tape, refer to the “Notes” shown below. When selecting LD/TV, TUNER, CD or PHONO, be sure that TAPE 1 and/or VCR/TAPE 2 are not also selected. INPUT VCR/TAPE 2 TAPE 1 LD/TV TUNER CD PHONO COPY MONITOR 2 Play the source and then turn the VOLUME control up to confirm the input source. 3 Set the tape deck or VCR in the recording mode. 4 * To monitor the audio and/or video signals being recorded, press the input selector button for the audio or video tape recorder being used to make the recording. A red selector switch indicator takes priority over an orange indicator. INPUT VCR/TAPE 2 TAPE 1 LD/TV TUNER CD PHONO COPY MONITOR SOURCE RECORDER Tape deck (or VCR) Tape deck connected connected to the ® to the TAPE 1 terminals VCR/TAPE 2 terminals STANDBY mode (Europe model only) This unit is switched between the POWER on mode and the POWER POWER /STANDBY /STANDBY STANDBY mode by the POWER switch. (In the STANDBY mode, the unit is live and the indicator is half illuminated.) To switch off the unit completely, disconnect the AC power plug from the wall outlet. POWER on mode STANDBY mode Adjusting the BALANCE control Selecting the SPEAKER system Adjust the balance of the output volume to the left and right Because one or two speaker systems can be connected to this speakers to compensate for sound imbalance caused from unit, the SPEAKERS switches allow you to select speaker speaker location or listening room conditions. system A or B, or both at once. BALANCE SPEAKERS AB ON ON OFF OFF 0 L5 5R Adjusting the BASS and TREBLE controls Adjusting the continuously variable LOUDNESS control This control provides compensation for the human ears’ loss of BASS TREBLE sensitivity to high and low-frequency ranges at low volume. This control is adjustable to retain full tonal range at any volume level. 1 LOUDNESS —55+ —55+ — 20dB I0 Set to the “FLAT” position. BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response. 2 VOLUME TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency Set to the loudest listening level that response. you would listen to. 3 LOUDNESS Turn so that the desired volume can FLAT — 20dB be achieved. I0 DEFEAT DEFEAT FLAT 0 — dB Using the SOURCE DIRECT switch You can enjoy the purest possible sound from your audio sources by setting this switch ON. By doing so, the audio signal bypasses the BASS, TREBLE, BALANCE and LOUDNESS controls, eliminating any alterations to the audio signal. SOURCE DIRECT ON OFF When you listen with headphones Connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position. PHONES REMOTE CONTROL TRANSMITTER The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player, tuner, turntable, equalizer, and tape deck connected to this unit are YAMAHA components designed for remote control compatibility (components with an Smark), then this remote control transmitter will also control various functions of each component. Please consult YAMAHA dealer for information on which components are compatible with the remote control transmitter. KEY FUNCTIONS For Control of This Unit POWER PLAY/CUT SKIP PLAY SEARCH PAUSE/STOP DISC SKIP CD PHONO TUNERA/B/C/D/E LD/TVEQ ON/FLAT TAPE 1DIR B VCR/TAPE 2 MONITOR +— REC MUTE EQ PRESET +— PRESET +— DECK A/B PLAY DIR A STOPREC PAUSE VOLUME Turns the power on/off. Selects input source. Turns the volume level up/down. For Other Component Control Identify the remote control transmitter keys with your component’s keys. If these keys are identical, their function will be the same. On each key function, refer to the corresponding instruction on your component’s manual. POWER PLAY/CUT SKIP PLAY SEARCH PAUSE/STOP DISC SKIP CD PHONO TUNERA/B/C/D/E LD/TVEQ ON/FLAT TAPE 1DIR B VCR/TAPE 2 MONITOR +— REC MUTE EQ PRESET +— PRESET +— DECK A/B PLAY DI...