Assessments - 1, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
If you are logged-in as a user for whom a password is set, a keyboard window will appear, allowing you to enter the password. For details on entering a password, refer to “Entering names” (> p. 34). 3 Enter the password for the logged-in user, and press the OK button. The CONSOLE LOCK screen will appear, the Console Lock function will be enabled, and all controls except MONITOR LEVEL knob will become inoperable. Unlocking the console 1 In the CONSOLE LOCK screen, press the UNLOCK button. If you are logged-in as a user for whom no password is set, the console will be unlocked. If you are logged-in as a user for whom a password is set, a keyboard window will appear, allowing you to enter the password. 2 Enter the password for the logged-in user, and press the OK button. The console will be unlocked, you will return to the SETUP screen, and the controls will be operable once again. User settings 18 HINT •You may disconnect the USB storage device while the console is locked. Reconnect the USB storage device before you press the UNLOCK button. 217 M7CL Owner’s Manual Using a USB storage device to save/load data Using a USB storage device to save/load data Using a USB storage device to save/load data Using a USB storage device to save/load data This section explains how you can connect a commercially-available USB storage device to the USB connector located at the right side of the display, and use it to save or load internal settings of the M7CL or user authentication keys. NOTE • Operation is guaranteed only with USB flash memory. • The operation of storage media with capacities of up to 16GB has been verified. (However, this does not necessarily guarantee the operation of all USB storage media.) The FAT12, FAT16 and FAT32 formats are supported. On the M7CL V1.12 or higher, storage media with a capacity of 4GB or larger will be formatted in FAT32 and storage media with a capacity of 2GB or smaller will be formatted in FAT16. Long file names are not supported. CAUTION • An ACCESS indicator is shown in the function access area while data is being accessed (saved, loaded, or deleted). Do not disconnect the USB connector or power-off the M7CL while this indicator is shown. Doing so may damage the data on the storage media. Saving the M7CL’s internal data on a USB storage device Here’s how all of the M7CL’s internal data (except for the data included in a user authentication key) can be saved on the USB storage device as a file. The saved file will have an extension of “.M7C”. 1 In the function access area, press the SETUP button to access the SETUP screen. SAVE/LOAD button 2 Press the SAVE/LOAD button to access the SAVE/LOAD popup window. 3 If necessary, press the directory icon and change the directory. To move to the next higher level, press the arrow button in the PATH field. 4 Press the SAVE button. A keyboard window will appear, allowing you to enter a file name and comment. 5 Enter a file name of up to eight characters, a comment of up to 32 characters, and press the SAVE button. When the file has finished being saved, the popup window showing the save progress indication and the type of data will close. NOTE • If you are going to overwrite a file or save a file with the same name in the same folder, a dialog will ask you to confirm the overwrite. M7CL Owner’s Manual Using a USB storage device to save/load data Using a USB storage device to save/load data a USB storage device Here’s how to load a M7CL setting file (.M7C) from the USB storage device on which it was saved. You can also load M7CL V1 and V2 files. If you load an MCL-32/48 file into the M7CL-48ES, or an M7CL-48ES file into the M7CL-32/48, the patch settings will change as shown in the table below. If you plan to load a file created by the M7CL V3 or later, convert the file if necessary. For more information on converting the file, please refer to “Converting and loading the file content from a USB storage device” (> p. 220) M7CL-32/48 + STAGE BOX M7CL-48ES INPUT 1–16 -* ES IN 1–16 INPUT 17–32 -* ES IN 17–32 INPUT 33–48 -* ES IN 33–48 ST IN 1L–4R - OMNI IN 1–8 SLOT1 IN 1–16 - SLOT1 IN 1–16 SLOT2 IN 1–16 - SLOT2 IN 1–16 SLOT3 IN 1–16 - SLOT3 IN 1–16 TALKBACK - TALKBACK OMNI OUT 1–16 - ES OUT 1–16 No assign - ES OUT 17–24 No assign - OMNI OUT 1–8 SLOT1 OUT 1–16 - SLOT1 OUT 1–16 SLOT2 OUT 1–16 - SLOT2 OUT 1–16 SLOT3 OUT 1–16 - SLOT3 OUT 1–16 2TR DIGITAL OUT - 2TR DIGITAL OUT * The same HA settings will be used. 1 In the function access area, press the SETUP button to access the SETUP screen. SAVE/LOAD button 2 Press the SAVE/LOAD button to access the SAVE/LOAD popup window. LOAD button File list 3 To select the file you want to load, press the desired file in the file list, or turn multifunction encoder on the panel. The highlighted line in the file list indicates the file that is selected for operations. 4 Press the LOAD button, and a confirmation dialog box will appear. 5 Press the OK button to begin loading the file. When the file has finished bein...
Este manual também é adequado para os modelos :Instrumentos musicais - M7CL-32 (11.76 mb)
Instrumentos musicais - M7CL-48 (11.76 mb)