Assessments - 5, GPA: 3.6
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Be sure to connect to a properly grounded power source. A ground screw is provided on the rear panel of this device for maximum safety and shock prevention. If the AC mains outlet is not grounded, be sure to connect the ground screw to a confirmed ground point before plugging the device into the mains. Improper grounding can result in electrical shock. Handling caution • Do not insert your fingers or hand in any gaps or openings on the device (vents etc.). •Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings on the device (vents etc.) If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel. • Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons, switches or connectors. (5)-1 4 Do not turn the POWER switch OFF and ON in rapid succession. Wait at least 5 seconds before turning the POWER switch ON after it has been turned OFF. The device to which power is being supplied may not operate properly in some cases. Do not turn the POWER switch OFF and ON in rapid succession. Wait at least 5 seconds before turning the POWER switch ON after it has been turned OFF. The device to which power is being supplied may not operate properly in some cases. If this device is to be rack mounted and transported frequently – such as in touring 2-R2 applications – be sure to support the rear end of the unit with mounting hardware that has been made to match the size of the rack used. Refer to the diagram on the right when preparing the mounting brackets. Please note, however, that only one of the required pair of brackets is shown in the diagram. You will need to two symmetrical brackets to support the device. 86.5 20.5 3.14-o6.5 R2 2-R2 R5 (82.1) 76.2 44.45 31.75 5.9 0 36.514.57.580121342000 t = 1.6 The PW800W has been specifically designed for use with Yamaha professional audio equipment. The PW800W cannot be used with devices having incompatible power ratings, connectors, etc. Refer to the owner’s manual supplied with your device to determine if it is compatible with the PW800W. Use the cable supplied with the device to be connected to connect the PW800W to your device. Use the optional PSL360 Power Supply Link Cable to connect the M7CL. When parallel-connecting two PW800W units use the optional PSL120 Power Supply Link Cable to connect the second PW800W to the main PW800W unit. Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed. Always turn the power off when the device is not in use. The performance of components with moving contacts, such as switches, and connectors, deteriorates over time. Consult qualified Yamaha service personnel about replacing defective components. ENGLISH 5 Controls and Connectors Controls and Connectors Front Panel 1 ENGLISH 1 POWER ON/OFF Switch/ POWER Indicator POWER ON/OFF Switch The PW800W supplies power to the connected device when this switch is ON. PW800W Power-on Procedure 1. Make sure that the PW800W power switch is OFF. 2. Connect the PW800W to the device to be powered using the cable supplied with the device (or PSL360). 3. Plug the PW800W power cord into an appropriate AC outlet. 4. Turn the POWER switch ON. Be sure to turn the POWER switch OFF before connecting the PW800W to the device to be powered. Connecting the power supply to the device to be powered while the POWER switch is ON can damage the device. POWER Indicator The POWER indicator will light when the PW800W is supplying power to the connected device. n Although the POWER indicator will light when the POWER switch is on while the powered device and PW800W are properly connected, please note that the indicator won’t light if the powered device and PW800W are not properly connected or a fault in the PW800W results in failure to output the required 24 volts DC. Never obstruct the cooling vents located on the front and rear panels of the PW800W. ¦ Rear Panel 3 45 2 DC OUTPUT Connector This connector supplies power from the PW800W to the connected device. When using parallel-connected PW800W units, this connector connects to the DC PARALLEL INPUT connector on the main PW800W unit. 2 Always use the cable supplied with the device to be connected to connect the PW800W to your device. Use the optional PSL360 Power Supply Link Cable to connect the M7CL. A second PW800W should be parallel-connected to the main PW800W only using the optional PSL120 Power Supply Link Cable. Rotate the connector ring to the right to connect, or to the left to disconnect. 6 ENGLISH 3 DC PARALLEL INPUT Connector This connector is used to connect two PW800W units in parallel. Two PW800W’s can be connected in this way to ensure uninterrupted failsafe operation in the even that one unit shuts down. Use only the optional PSL120 Power Supply Link Cable for this connection. ...