Assessments - 1, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
CL Editor Owner’s Manual 31 7 7 If the compressor is selected, specifies the ratio at which the input signal will be compressed when the key-in signal exceeds the threshold. If the expander is selected, specifies the ratio at which the input signal will be compressed when the key-in signal falls below the threshold. 8 KNEE Specifies the sharpness at which the output level will change. You can select from HARD or 1–5. 9 ATTACK If the compressor is selected, specifies the time (the attack time) from when the key-in signal exceeds the threshold level until the signal starts being compressed. If the expander is selected, specifies the time (the attack time) from when the key-in signal falls below the threshold level until the signal starts being compressed. 0 GAIN Adjusts the gain of the signal after it has passed through the compressor/expander. A RELEASE If the compressor is selected, specifies the time (the release time) from when the key-in signal falls below the threshold level until compression is removed. If the expander is selected, specifies the time (the release time) from when the key- in signal exceeds the threshold level until compression is removed. B KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. If COMPANDER-H, COMPANDER-S is selected 51 23 4B07869A 1 TYPE Indicates the type of the currently selected compander (a combination of compressor and expander.) You can click here to select the type. 2 LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the Library window. 3 ON This button switches the compander on/off. 4 Response curve Indicates the response for the compander of the currently selected channel. 5 GR meter (Gain Reduction meter) This meter indicates the amount of gain reduction produced by the compander. 6 THRESH (Threshold level) Specifies the threshold level at which compression and expansion are applied. The input signal will be compressed when the key-in signal exceeds this level. The expander effect will apply to levels below THRESHOLD + WIDTH. CL Editor Owner’s Manual 32 7 7 Specifies the ratio (the amount of compression.) 8 WIDTH Specifies the width between the threshold level of the compressor (THRESHOLD) and the threshold level of the expander. 9 ATTACK Specifies the time (the attack time) until it starts to compress and expand the input signal once the compander has been triggered. 0 GAIN Adjusts the gain of the signal after it has passed through the compander. A RELEASE Specifies the time (the release time) from when the key-in signal falls below the threshold level until compression and expansion are removed. B KEY IN SOURCE Click this to select the key-in signal that you want to use. The choices are the same as for GATE. If DE-ESSER is selected 51 23 407896 1 TYPE This indicates that De-Esser is the currently selected type. 2 LIBRARY This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the Library window. 3 ON This button switches the de-esser on/off. 4 Response curve Indicates the response for the de-esser of the currently selected channel. 5 GR meter (Gain Reduction meter) This meter indicates the amount of gain reduction produced by the de-esser. 6 THRESH (Threshold level) Specifies the threshold level at which the de-esser will operate. The input signal will start being compressed when the key-in signal exceeds this level; compression will be removed when the signal falls below this level. 7 FREQ (Minimum frequency/Center frequency) Specifies the minimum frequency (for HPF) or the center frequency (for BPF) at which the key-in signal will activate the de-esser. CL Editor Owner’s Manual 33 8 8 Drag the knob in the screen to select the HPF (High Pass Filter) or BPF (Band Pass Filter.) 9 Q Adjust the Q level of the frequency range at which the key-in signal will activate the de-esser. 0 KEY IN SOURCE The key-in signal is set to the SELF POST EQ. . DELAY 12 1 ON Turns the delay on/off of the currently selected channel. 2 Delay time Drag the knob in the screen to adjust the delay time of the currently selected channel. . INSERT (except for ST IN channels) 145623 1 ON Enables/disables insert-in/out. 2 OUT (Insert out) Click this to select the output port that will be assigned to insert-out, from the following choices. NONE No assignment OMNI 1-OMNI 8 OMNI OUT jacks 1–8 SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 Output channels of an I/O card installed in slots 1–3 FX1L(A), FX1R(B)...FX8L(A), FX8R(B) L/R inputs of EFFECT rack 1–8 PR1L(A), PR1R(B)...PR8L(A), PR8R(B) L/R inputs of PREMIUM rack 1–8 3 IN (Insert in) Click this to select the input port that will be assigned to insert-in, from the following choices. NONE No assignment OMNI 1-OMNI 8 OMNI IN jacks 1–8 SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 Input channels of an I/O card installed in slots 1–3 FX1L(A), FX1R(B)...FX8L(A), FX8R(B) L/R outputs of EFFECT rack 1–8 PR1L(A), PR1...
Este manual também é adequado para os modelos :Instrumentos musicais - CL1 (4.57 mb)
Instrumentos musicais - CL3 (4.57 mb)
Instrumentos musicais - CL5 (4.57 mb)
Instrumentos musicais - Rio3224-D (4.57 mb)