Assessments - 3, GPA: 3.7 ( )

Fabricante : Yamaha Arquivo Tamanho: 1.64 mb Arquivo Nome : Língua de Ensino:

por este dispositivo também tem outras instruções :

Instrumentos musicais - M2500-56C (128.49 kb)

Instrumentos musicais - M2500-56C (1.65 mb)

Instrumentos musicais - M2500-56C (128.49 kb)

Instrumentos musicais - M2500-56C (4.29 mb)

2. Press the RECALL switch. The scene of the selected scene memory number will be recalled. Note: If a scene has not been saved in the selected scene memory number, the MEMORY display will indicate “ ” (No data), and the scene will not be recalled. RECALL Using Direct Recall to recall a scene With the factory settings, you can use the DIRECT RECALL of the control section to directly recall scene memory numbers 1–8. (This is called the Direct Recall function.) When you use direct recall, scene memory numbers 1–8 will be recalled the instant you press a DIRECT RECALL switch 1–8, without your having to press the RECALL switch. 1 2 3 4 5 6 7 8 DIRECT RECALL 1 2 3 4 5 6 7 8 9 0 ENTER Hint: If you press the / switches after using direct recall, the scene memory number that had been selected prior to the direct recall operation will be selected. Note: If you are using the mute groups (page 37), the DIRECT RECALL switches will function as mute group switches, and direct recall will not be available. Storing a scene 1. With the M2500 in Normal mode, use the ON/ EDIT switches of the monaural/stereo input channels, the G1/A7–G8/A14 section, the STEREO section, and the MONO/C section to make the desired on/off settings. Note: Operating the ON/EDIT switches in Normal mode will affect the signals that are output from the M2500. If you wish to make on/off settings for a scene without affecting the current signal output, such as during a rehearsal or an actual performance, use Check mode (page 32). M2500—Owner’s Manual 31 The Scene Memory function The Scene Memory function Use the / switches or the 0–9/EDIT switches to make the MEMORY display indicate the scene memory number into which you wish to store the scene. (Scene memory numbers 129 and 130 are recall-only, and cannot be selected.) 12 34 56 78 90 ENTER The selected scene memory number will blink in the display. 3. Press the STORE switch. The MEMORY display will blink “ ,” indicating that it is ready to store. If you decide to cancel with- out storing, press any key other than STORE. 4. Press the STORE key once again to store the scene. Hint: The scenes stored in scene memory numbers 1–8 can be recalled instantly using Direct Recall. You will find it convenient to store frequently-used scenes in these scene memory numbers. Note: When you store a scene, the contents of the store destination scene memory number will be STORE 1 2 3 4 5 6 7 8 9 0 ENTER overwritten, and it will not be possible to recover the previous contents. Note: If memory protect is on, the MEMORY display will indicate “ ,” and the scene will not be stored. (With the factory settings, this is turned off.) To turn memory protect off, refer to page 34. Check mode operation In Check mode, you can check the settings of a scene before recalling it, or edit the on/off settings of a scene without affecting the current on/off statuses. Checking the contents of a scene you wish to recall 1. In Normal mode, press the CHECK switch of the control section. CHECK The indicator of the CHECK switch will light, and you will enter Check mode. 2. Use the / switches or the 0–9/ENTER switches to make the MEMORY display indicate the scene memory number whose settings you wish to check. Note: If you use the 0–9 switches, the scene memory number will not be finalized until you press the ENTER switch. The on/off settings of the selected scene will be indicated by the lit/dark states of the CHECK indicators for the monaural/stereo input channels, the G1/A7– G8/A14 section, the STEREO section, and the MONO/C section. This allows you to check the on/ off settings of the selected scene before you actually recall it. 32 M2500—Owner’s Manual The Scene Memory function The Scene Memory function If you wish to actually recall the selected scene, press the RECALL switch. RECALL The scene whose on/off settings you checked will be recalled, and the M2500 will automatically return to Normal mode. If you wish to return to Normal mode without recalling the scene, press the CHECK switch once again. Note: If you press a DIRECT RECALL 1–8 switch while in Check mode, the corresponding scene memory number 1–8 will be forcibly recalled, and Check mode will also be cancelled. Editing and storing the scene you are checking In Check mode, you can edit the scene whose on/off settings you are checking with the CHECK indicators, and then store it once again. This is convenient when you wish to modify the contents of the scene that you will recall next, without changing the current on/off settings. 1. In Normal mode, press the CHECK switch to enter Check mode. CHECK 2. Use the / switches or the 0–9/ENTER switches to select the scene memory number that you wish to edit. Note: If you use the 0–9 switches, the scene memory number will not be finalized until you press the ENTER switch. 12 34 56 78 90 ENTER The lit/dark status of the CHECK indicators for each monaural/stereo input channel, the G1/A7–G8/A14 section, the STEREO section, and the MONO/C section ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :