Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
ON/EDIT Switch 60 CH INPUT 56 90 61 MIX 1 OUT 91 62 MIX 2 OUT 92 63 MIX 3 OUT 93 64 MIX 4 OUT 94 65 MIX 5 OUT 95 66 MIX 6 OUT 96 67 MIX 7 OUT 97 68 MIX 8 OUT 98 69 STEREO A OUT 99 70 100 71 101 72 102 73 MIX 9 OUT 103 74 MIX 10 OUT 104 75 MIX 11 OUT 105 MUTE GROUP 1 76 MIX 12 OUT 106 MUTE GROUP 2 77 MIX 13/14 OUT 107 MUTE GROUP 3 78 MIX 15/16 OUT 108 MUTE GROUP 4 79 109 MUTE GROUP 5 80 110 MUTE GROUP 6 81 111 MUTE GROUP 7 82 112 MUTE GROUP 8 83 113 84 114 85 115 86 116 87 117 88 118 89 119 • If the CC (control change) parameter of utility mode is set to “ ” (mute group), only control change numbers (105–112) which correspond to mute groups will be transmitted or received. Using mute groups When the utility mode oP (recall operation) parameter is set to“ ” (refer to page 34), the DIRECT RECALL 1–8 switches will function as “mute group” switches, and the scenes of memory numbers 1–8 can be used as mute groups. If two or more DIRECT RECALL switches are turned on, channels or buses which are off (muted) in the corresponding scenes will be turned off (while the ON status stored in these scenes is ignored). The following diagram shows the difference in operation between when the oP parameter is set to “ ” (direct recall) and “ ” (Mute group). If the oP parameter is set to “ ,” recalling a new scene will cause the channels or buses to be switched on/off according to the settings saved in that scene. In contrast if this parameter is set to “ ,” two or more DIRECT RECALL 1–8 switches can be turned on, and all channels or buses which are muted (off) in any of the mute groups will be muted. Mute group 1 (scene memory number 1) CHECK CHECK CHECK CHECK ON ON ON ON ON/ ON/ ON/ ON/ EDIT EDIT EDIT EDIT ON ON ON MUTE (OFF) When Direct Recall is used CHECK ON ON/ EDIT MUTE (OFF) CHECK CHECK CHECK ON ON ON ON/ ON/ ON/ EDIT EDIT EDIT ON ON MUTE (OFF) CHECK ON ON/ EDIT ON Mute group 3 (scene memory number 3) CHECK ON ON/ EDIT MUTE (OFF) 8 7 6 5 4 3 2 1 The on/off settings of memory number 1 are recalled OFF ON ON OFF ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON 8 7 6 5 4 3 2 1 Switch to the on/off settings of memory number 3 ON ON ON OFF OFF ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON About the Scene Memory function About the Scene Memory function CHECK CHECK CHECK CHECK CHECK ON ON ON ON ON ON/ ON/ ON/ ON/ ON/ EDIT EDIT EDIT EDIT EDIT MUTE ON ON MUTE ON (OFF) (OFF) Mute group 3 (scene memory number 3) CHECK CHECK CHECK CHECK CHECK ON ON ON ON ON ON/ ON/ ON/ ON/ ON/ EDIT EDIT EDIT EDIT EDIT ON ON ON MUTE MUTE (OFF) (OFF) When Mute Group is used 8 7 6 5 4 3 2 1 The mute settings of memory number 1 are recalled MUTE ON ON MUTE ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON 8 7 6 5 4 3 2 1 The mute settings of memory number 3 are added MUTE ON ON MUTE MUTE ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON ON/ EDIT CHECK ON Adding/defeating mute groups 1. Store the channel or bus mute settings that you wish to use as a mute group in a memory number 1–8. 2. In utility mode, select the oP (recall operation) item, and switch the display to “ .” (For details refer to page 34.) 3. Either press and hold the UTILITY switch for one second or more, or press the UTILITY switch repeatedly to return to normal mode. Even if the Utility mode item oP is set to “ ,” you can edit scenes 1–8 either by using the 0–9/ENTER buttons to specify the scene number or by entering check mode. 4. Press a DIRECT RECALL 1–8 switch. The corresponding mute group will become active, and the channels or buses which are turned off (muted) in that scene will be muted. 5. As desired, press other DIRECT RECALL 1–8 switches. Mute groups will be added, and channels or buses which are turned off (muted) on those scenes will be muted. 6. If you wish to defeat a mute group, press the corresponding DIRECT RECALL 1–8 switch. The mute group will be canceled. Note: • The mute settings used in a mute group are the same as the on/off settings of the scenes stored in memory numbers 1–8. • Even while using mute groups, you can use the s /t switches or 0–9/ENTER buttons to recall memory numbers 9–128. However in this case, the currently-muted channels or buses will not change until you defeat the applicable mute groups. • If you use the 0–9/ENTER buttons to recall memory number 129 (all on) or 130 (all off), the mute group settings of the DIRECT RECALL 1–8 switches will be defeated. About the local control circuit If an error occurs in the system of the M3000A, the on/off control of each input channel and bus will automatically switch from the scene memory circuit to the local control circuit, allowing you to operate the M3000A like a conventional analog mixer. In this case, the ON/EDIT switch of each input channel or mix channel will function like a conventional ON/OFF (mute) switch. However, the MEMORY display will go dark...
Este manual também é adequado para os modelos :Instrumentos musicais - M3000A-24 (621.46 kb)
Instrumentos musicais - M3000A-32 (621.46 kb)
Instrumentos musicais - M3000A-40C (621.46 kb)