Assessments - 3, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
ST2/MONITOR module 1PFL indicator 1 This indicator (yellow) will light when the PFL switch of one or more modules is turned on. 2 22TR IN switch This switch selects the 2TR IN input signal. This signal will be sent to the 3 headphone jack and to the ST2/MONI OUT jack. When this switch is on, the 2TR IN input signal will be sent regardless of each module’s PFL and 4 AFL switch settings. 53MONI/ST2 switch This switch selects the signal that is output to the ST2/MONI OUT jack. When the switch is in the “ST2” position, the signal will be the same as the signal that is sent to the ST1 OUT jack. When the switch is in the “MONI” position, the signal will be taken from the PFL bus, AFL bus, or the 2TR IN jack. 4ON switch This switch turns the ST2/MONITOR module on/off. When the switch is pressed in the module is on.When the module is off, no signal will be output from the ST2/MONI OUT jack. 6 5L+R switch This switch causes a mono mixed signal to be output from the ST2/MONI OUT jack. 6ST2/MONITOR fader This fader controls the signal level of the ST2/MONITOR output. MX400 User’s Guide Master module (L-ST1-R) Master module (L-ST1-R) 9 POWER 1 PHANTOM 2 3 TALKBACK IN GRP 1–4 AUX 1–4 4 ST 5 0 10 LEVEL TB 6 0 10 REC OUT 7 0 10 0 10 TAPE IN PHONES ON 10 10 5 5 0 0 0 5 5 10 10 15 15 20 20 25 25 30 30 40 40 . . L — ST 1 — R Master module (L-ST1-R) 1POWER indicator This indicator lights when the power switch is turned on. 2PHANTOM indicator This indicator lights when the PHANTOM switch is turned on, indicating that phantom power is being supplied. 3TALKBACK IN jack This is an unbalanced XLR type jack for connecting a talkback mic. The nominal input level is –50dB. 4Assign switches (GRP 1-4, AUX 1-4, ST) These switches select the output destination (mix bus) of the talkback mic. 5LEVEL control This adjusts the signal level of the talkback mic. 6TB switch This switch controls the talkback signal. When it is pressed, the talkback signal will be sent to the output destination selected by the assign switch located above. 7Headphone jack / PHONES control This is a 1/4” stereo phone jack for connecting a set of stereo headphones. Headphones connected here can be used to monitor PFL, AFL, and the 2TR IN signals. 8REC OUT / TAPE IN controls The REC OUT control adjusts the output signal level of the REC OUT jack. The TAPE IN control adjusts the input signal level of the TAPE IN jack. 9ON switch This switch turns the ST1 OUT output on/off. When it is pressed in, the signal from the ST1 OUT jack will be output. 0L-ST1-R faders These faders control the level of the ST OUT output. A position at the zero (0) marking is the nominal output level. MX400 User’s Guide 10 Front and rear panels 10 Front and rear panels s GROUP 1 GROUP 2 GROUP 3 GROUP 4 L RST2/MONITOR METER SELECT PEAK +6 +4 +2 0 –2 –4 –7 –10 –15 –20 PEAK +6 +4 +2 0 –2 –4 –7 –10 –15 –20 1 PEAK +6 +4 +2 0 –2 –4 –7 –10 –15 –20 L RSTEREO 1 The MX400 provides six LED meters, and three types of output level can be viewed on the meters. 1) GROUP 1/2, 2) GROUP 3/4 or ST2/MONITOR L/R, 3) STEREO L/R. The “0” position indicates the nominal output level. The “PEAK” position indicates that the output level is 3dB before clipping. 1METER SELECT switch This switch selects whether GROUP 3/4 or ST2/MONITOR L/R will be monitored. When the switch is not pressed in ( ), the central meter group will indicate the GROUP 3/4 signal level. When the switch is pressed in ( ), the central meter group will indicate the ST2/MONITOR L/R signal level. MX400 User’s Guide Rear panel 11 Rear panel 11 l INSERT OUT IN 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 DIRECT OUT 0dB INSERT I/O 0dBINPUT INPUT B INPUT A 1 2 3 4 1INPUT A jacks These are unbalanced XLR3-31 type jacks which input the signal for each input module. Use the A/B switch to select these jacks. • Nominal input level: –60dB Phantom power (+48 V) can be supplied to these jacks. Phantom power is turned on/off using the PHANTOM switch. When the PHANTOM switch is on, make sure that those devices which do not require phantom power are connected to the INPUT B jacks (2). 2INPUT B jacks These are 1/4” phone jacks which input the signal for each input module. Use the A/B switch to select these jacks. These are balanced TRS jacks, with tip=hot, ring=cold, and sleeve=ground. • Nominal input level: –60dB 3INPUT INSERT I/O jacks (0dB) These are 1/4” phone jacks patched in front of the input module faders. These are unbalanced TRS jacks, with tip=out, ring=in, and sleeve=ground. • Nominal input level: 0dB • Nominal output level: 0dB 4DIRECT OUT jacks (0dB) These are unbalanced 1/4” phone jacks which output the post-fader signal independently from each input module. • Nominal output level: 0dB MX400 User’s Guide 12 Rear panel 12 Rear panel 5 AUX SEND +4dB GROUP SUB IN +4dB ST INPUT 2 ST INPUT 1 5 4 3 2 1 2 1 C L/ MONO L/ MONO GROUP INSERT I/O 0dB 4 3 2 1 ST INSERT I/O 4 3 R A R 0A D L 2TR IN ST SUB IN F 4 GROUP OUT +4dB 3 2 1 R 0dB L –10dBV L +4d...
Este manual também é adequado para os modelos :Instrumentos musicais - MX400-12 (935.02 kb)
Instrumentos musicais - MX400-24 (935.02 kb)
Instrumentos musicais - MX400-8 (935.02 kb)