Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Appendix A-18 426-E-110A PL40NE01-1.book 18 ... 2002.7.23........6.52. A-19 Appendix 426-E-111A PL40NE01-1.book 19 ... 2002.7.23........6.52. Appendix A-20 426-E-112A PL40NE01-1.book 20 ... 2002.7.23........6.52. A-21 Appendix 426-E-113A PL40NE01-1.book 21 ... 2002.7.23........6.52. PL40NE01-1.book 22 ... 2002.7.23........6.52. MIDI Data Format Channel Messages • The channel numbers used for channel messages received for each part are in accordance with the receive channel settings for each part made using the instrument’s “MIDI Rx Ch” parameter. Channel messages are not received for parts that are turned off using “MIDI Rx Ch”. • When the instrument’s “MIDI In-chord Judge” setting is turned on, the instrument’s auto accompaniment chord can be specified by a note message in the accompaniment keyboard range received over the channel specified by the receive channel setting for Part 1. • Note On Recognition Format Byte 1 Byte 2 Byte 3 9nH kkH vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) kk........Note Number = 00H to 7FH vv........Note On Velocity = 00H to 7FH Remarks Normally, the range of the Note Number is 00H to 7FH. Send Format Note Messages • Note Off Recognition Format Byte 1 Byte 2 Byte 3 8nH kkH vvH 9nH kkH 00H n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) kk........Note Number = 00H to 7FH vv........ Note Off Velocity = 00H to 7FH Remarks Note Off Velocity value is ignored. Send Format Byte 1 Byte 2 Byte 3 8nH kkH vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) kk........Note Number = 15H to 6CH vv........ Note Off Velocity = 40H Byte 1 Byte 2 Byte 3 9nH kkH vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) kk........Note Number = 15H to 6CH vv........Note On Velocity = 01 to 7FH Polyphonic Key Pressure Format Byte 1 Byte 2 Byte 3 AnH kkH vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) kk........Note Number = 00H to 7FH vv........Pressure Value = 00H to 7FH Recognition The effect is configured in accordance with a received system exclusive message. Send Polyphonic Key Pressure messages cannot be sent. 426-E-114A A-22 PL40NE01-1.book 23 ... 2002.7.23........6.52. MIDI Data Format Control Change • Bank Select Format Byte 1 Byte 2 Byte 3 BnH 00H mmH (Bank Select MSB) BnH 20H llH (Bank Select LSB) n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) mm ..... Bank Number MSB = 00H to 7FH ll ..........Bank Number LSB = 00H to 7FH Recognition The ll value is ignored. Send A Bank Select message is sent at the same time when you select a tone on the instrument. • Modulation Wheel Format Byte 1 Byte 2 Byte 3 BnH 01H vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........ Modulation Depth = 00H to 7FH Recognition Use System Exclusive messages to select a type of modulation. Send This message cannot be sent. • Portamento Time Format Byte 1 Byte 2 Byte 3 BnH 05H vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........ Portament Time = 00H to 7FH • Data Entry Format Byte 1 Byte 2 Byte 3 BnH 06H mmH (Data Entry MSB) BnH 26H llH (Data Entry LSB) n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) mm .....Data entry MSB value for the parameter that is selected by RPN and NRPN ll ..........Data entry LSB value for the parameter that is selected by RPN and NRPN • Channel Volume Format Byte 1 Byte 2 Byte 3 BnH 07H vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........Volume = 00H to 7FH Send Channel Volume messages are sent when you change mixer volume. • Pan Format Byte 1 Byte 2 Byte 3 BnH 0AH vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........Pan = 00H (left) to 40H (center) to 7FH (right) Recognition When a Pan message is received on the drum part, the Pan setting changes relatively to the Pan setting of each drum sound on the drum part. Send Pan messages are sent when you change the pan setting using the mixer. 426-E-115A A-23 PL40NE01-1.book 24 ... 2002.7.23........6.52. MIDI Data Format • Expression Controller Format Byte 1 Byte 2 Byte 3 BnH 0BH vvH n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........ Expression = 00H to 7FH Send This message cannot be sent. • Hold 1 (Damper Pedal) Format Byte 1 Byte 2 Byte 3 BnH 40H vvH Recognition n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........ Hold 1 = 00H to 7FH (00H to 3FH : OFF, 40H to 7FH : ON) Send n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........ Hold 1 = 00H, 7FH (00H : OFF, 7FH : ON) Hold 1 messages are sent when you operate the damper pedal on the instrument. • Portamento Format Byte 1 Byte 2 Byte 3 BnH 41H vvH Recognition n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........ Portamento = 00H to 7FH (00H to 7EH : OFF, 7FH : ON) Send This message cannot be sent. • Sostenuto Format Byte 1 Byte 2 Byte 3 BnH 42H vvH Recognition n ..........Voice Channel Number = 0H to FH (Ch1 to Ch16) vv........Sostenuto = 00H to 7FH (00H to 3FH : OFF, 40H to 7FH : ON) ...