Assessments - 3, GPA: 3.7
(
)
)
|
Fotos e especificações Casio WK-110 |
Facilidade de uso
Performance recording records the data shown in the illustration below, using two memory tracks. • Since each track is independent of the other, you can edit a recording by re-recording only one of the tracks. Track 1 Start End Track 2 Auto Accompaniment (rhythm, bass, chords), melody Melody Data recorded in track Using the RECORDER Button Each press of the RECORDER button cycles through the recording options in the sequence shown below. Memory Capacity This keyboard can hold a total of approximately 12,000 notes, which can be divided between a lesson recording and a performance recording. Note that you can use up all 12,000 notes for either the lesson recording or the performance recording. If you do, you will not be able to record anything for the other type of recording. • The recorder shares the same memory area with the song bank area used for storing song data transferred from a computer. Because of this, you may not be able to store the full 12,000 notes of data. • When the number of remaining notes becomes less than about 100 while you are recording, the RECORDER indicator and the track/part indicator (L, R) will start to flash at high speed. • Recording will stop automatically if memory becomes full. If you are using Auto Accompaniment or a rhythm, they will also stop playing at this time. IMPORTANT! • Never turn off the keyboard while it is recording or standing by for recording to the keyboard. Doing so will cause all of the song data currently stored in the Song Bank user area to be deleted. Playback Standby Record Standby Normal Displayed Flashing Not displayed Recording and Play Back Recorded Data Storage • Anything previously stored in the keyboard is replaced whenever you make a new recording. • Recorder contents are retained even when power is turned off, as long as the keyboard is being supplied battery or AC adaptor power. If you remove the batteries or should the batteries go dead while the keyboard is not being supplied power by the AC adaptor, recorder contents will be deleted. Be sure to supply power to the keyboard with the AC adaptor when replacing batteries. • Turning off the keyboard while a record operation is in progress causes the contents of the track you are currently recording to be lost. CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or damage to you or any third party arising out of the loss or corruption of data. Recording Play Along with a Built- in Tune You can use the lesson recording procedure to record notes you play along with one of the keyboard’s built-in tunes. When you start a lesson recording, the keyboard plays the song minus the part(s) you selected as the recording part(s). Selecting Parts Press the part/track button that corresponds to the part(s) you want to select as the recording part(s). To select this part: Press this button: Left-hand LEFT/TRACK 1 Right-hand RIGHT/TRACK 2 Both hands LEFT/TRACK 1 + RIGHT/TRACK 2 The part that is currently selected is indicated by the part/ track indicators (L and R) that appear on the display as described below. Part/Track Indicators in Recording Standby Press the part/track button of the part you want to play on the keyboard (recording part). This causes its part/track indicator to flash. Playback part Recording part (not displayed) (flashing) Example: The above indicates the left-hand part is the playback part, and the right-hand part is the recording part. Recording and Play Back To record as you play along with a built-in tune 1 Press the SONG BANK button to select the mode that includes the tune you want to play along with. Indicator appears 2 Use the RECORDER button to select record standby. • This causes the RECORDER indicator to flash on the display. 3 Select the tune you want to play along with. • See “To play back a Song Bank tune” on page E-22 for information about selecting Song Bank tunes. 4 Use the LEFT/TRACK 1 button or RIGHT/TRACK 2 button to select the part(s) (left-hand, right-hand) you want to mute in the built-in tune playback and play along on the keyboard. • If you want to mute and play both parts, press both buttons at the same time. 5 Configure the following settings as required. • Tone (page E-20) • Tempo (page E-23) 6 Press the controller block START/STOP button. • This starts recording. 7 Play the notes for the part(s) you selected in step 4 on the keyboard. 8 Recording stops automatically when playback of the built-in tune is finished. • To interrupt recording part way through, press the controller block START/STOP button. This will play back everything you recorded up to that point. • If you want to hear what you recorded immediately, press the controller block START/STOP button again. Lesson Recording Data In addition to the notes you play on the keyboard and the accompaniment of the built-in song you selected, the following data is also stored by a lesson recording operation. • Tone setting • Tempo setting • Tune name • Recording part selection • Pedal operations • Layer ...
Este manual também é adequado para os modelos :Instrumentos musicais - CTK-810 (2.71 mb)