Assessments - 6, GPA: 4
(
)
)
|
Facilidade de uso
PRESET SELECT MODE In this mode, all three switches control effects presets. Their corresponding LEDs indicate which preset is active. Once desired settings are achieved utilizing the effects controls on the front panel, double-click one of the Preset switches (30, 33, or 35) to store the settings. To return to the last saved settings for a Preset, press the desired Preset switch once. For a detailed explanation on creating and storing presets, refer to the TWEAK FEATURES section of this manual on the following page. EFX SELECT MODE NOTE: When entering this mode, the current preset will remain active. In this mode, SWITCH 1 (30) selects between the Lead and Clean channels. The CHANNEL LED (31) will illuminate when the Lead channel is active. SWITCH 2 (33) toggles between two effects and their respective settings. This switch may be used as an on/off switch if one of the settings has no effects active. To use the MODULATION LED (32) as a status indicator, the “off” (or lower setting) should be made with the LED dark, and the “on” (or higher setting) made with the LED illuminated. SWITCH 3 (35) toggles between two reverb and delay settings. As with effects settings, this switch may be used as an on/off for reverb and delay. Both functions change simultaneously when this switch is depressed. 8 TWEAK FEATURES EFX amplifiers offer hidden features to further adjust the parameters of the digital effects. In addition to the adjustments described in the EFXADJ PARAMETERS section of this manual, additional tweaks may be made to customize effects to user preference. Tweaks are made by pressing and holding the EFX ADJUST (12) control while simultaneously rotating the REVERB (13) control. The EFXADJUST control must be pressed for at least one second to enter Tweak Mode. Reverb setting will not be affected while in Tweak Mode. The LED ring surrounding the control will now reflect the value of the effect being tweaked. As in standard parameter changes, the effect being tweaked will be the active effect as indicated by the LED adjacent to the effect name. TWEAK ADJ PARAMETERS Tremolo - Intensity Funk Wah - Decay time Phaser - Depth Flanger - Depth Rotary Speaker - Wet/Dry mix Chorus - Wet/Dry mix To recover the factory settings for both Standard and Tweak Modes, press the EFX ADJUST (12) control and hold for one second to enter Tweak Mode, then press the DELAY (14) control. CREATING AND STORING A CUSTOM PRESET The following steps explain the creation and storage of two different effects/settings, as well as two different settings for Delay/Reverb. The Flanger and Octaver effects were selected at random. These steps will accomplish custom presets using any of the effects. 1. Assure the footswitch is in the EFX Select Mode by pressing the MODE SWITCH (28) if necessary. The MODE LED (29) will illuminate. 2. Use SWITCH 1 (30) to select Lead or Clean channel. The CHANNEL LED (31) will illuminate for Lead channel. 3. Select the position of SWITCH 2 (33). The MODULATION LED (32) may be illuminated or dark at the discretion of the user. 4. Select Flanger and adjust rate to preference using the EFX ADJUST (12) control on the front panel (standard adjustment). 5. Press and hold the EFX ADJUST (12) control while adjusting Flanger depth to preference with the REVERB (13) control on the front panel (tweak). 6. Press SWITCH 2 (33) to change to the other Modulation position.The MODULATION LED (32) will illuminate or go dark depending on its status in step 5. 7. Select Octaver and adjust wet/dry mix to preference using the EFX ADJUST (12) control on the front panel (standard adjustment). 8. Select the position of SWITCH 3 (35). The DELAY/REVERB LED (34) may be illuminated or dark at the discretion of the user. 9. Adjust reverb to preference using the REVERB (13) control on the front panel. 10. Press SWITCH 3 (35) to change to the other Delay/Reverb position. The DELAY/REVERB LED (34) will illuminate or go dark depending on its status in step 10. 11. Adjust delay type, time, and volume to preference using the DELAY (14) control. 12. Set the position of SWITCH 2 (33) and SWITCH 3 (35) to the settings preferred as defaults. (Default setting is the one that is active when the preset is selected.) 13. Press the MODE SWITCH (28) to return to the Preset Mode. 14. Double-click PRESET 1, 2, or 3 (30, 33, or 35) to store the settings in that location. 9 SUGGESTED SETTINGS These are general settings to achieve the sound of various musical styles. The exact settings will depend on such things as the type of guitar being played and effects settings. The 212 EFX is used for demonstration, but the settings, with the exception of the Presence and Resonance controls, are also applicable to the 112 EFX. CLEAN METAL Your Preference Your Preference JAZZ MODERATE DISTORTION Your Preference Your Preference CLEAN BLUES DIRTY BLUES Your Preference 10 11 TRANSTUBE ® EFX BLOCK DIAGRAM 112 EFX EFFECTS POWER LOOP AMP LEADCLEAN VINTAGE MODERN 212 EFX PRE MOREVINTAGE ...
Este manual também é adequado para os modelos :Instrumentos musicais - Transtube 9/0180305014 (2.37 mb)
Instrumentos musicais - Transtube 112/212 EFX (2.37 mb)
Instrumentos musicais - Transtube 112/212 EFX (2.37 mb)