Assessments - , GPA:
(
)
)
Fabricante : Crate Amplifiers
Arquivo Tamanho: 475.43 kb
Arquivo Nome : FW65_OM.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
• Select the Overdrive channel. Set the Mod control to “Chorus,” the Delay control to “Slap,” and readjust the Reverb control to a different setting. (The DSP settings for the Clean channel are now saved to memory.) • Select the High Gain channel. Set the Mod control to “Phaser,” the Delay control to “Long,” and readjust the Reverb control once again. (The DSP settings for the Overdrive channel are now saved to memory.) • Reselect the Clean channel. (The DSP settings for the High Gain channel are now saved to memory.) When you reselected the Clean channel, the DSP settings previously stored in memory were automatically recalled. Switch to the Overdrive channel and the DSP settings you just stored are still there. You can change the DSP settings at any time. Once you set the DSP and select another channel, Channel Tracking stores the settings for you. Even when the amplifier is turned off, the DSP settings are stored and recalled the next time you turn it on. That’s the power of Channel Tracking! In addition, each channel has two DSP banks, Bank A and Bank B, when you use the supplied three-button footswitch (see page 8 for more information on using the footswitch). Channel Tracking also remembers which DSP bank was selected for each channel. FlexWave65/112 Guitar Amplifier w/DSP and Channel Tracking The Front Panel 0 10 0 10 0 10 0 10 0 10 0 10 0 10 0 10 0 10 0 10 0 10 0 10 SLAP LONG MEDIUM DELAYMODREVERBHIGHHIGH MIDMID LOWLOW VOLUMELEVELLEVELSHAPEGAININPUT POWERGAIN CHORUS PHASER FLANGER EFFECTSCLEANHIGH GAIN OVERDRIVE OVERDRIVE CLEAN HIGH GAIN OVERDRIVE CD INPUT 1 2 3 1514 16 17 18 19 20 21 2322125 6 7 8 9 1311104 1. INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable. 2. HIGH GAIN LED: This LED illuminates when the High Gain channel is selected. 3. GAIN: Use this control to adjust the amount of distortion for the High Gain channel. 4. SHAPE: Use this control to “dial in” the tone for the High Gain channel. Rotating this control counter-clockwise enhances the mid frequencies, while rotating it clockwise enhances the low and high frequencies. 5. LEVEL: Use this control to adjust the output level of the High Gain channel. 6. HIGH GAIN/OVERDRIVE: Use this switch to select the High Gain or Overdrive channel. With the switch in the out position, the Overdrive channel is selected. When the switch is pushed in, the High Gain channel is selected. Note: This switch is only active when the Overdrive/Clean switch [13] is pushed in. 7. OVERDRIVE LED: This LED illuminates when the Overdrive channel is selected. 8. GAIN: Use this control to adjust the amount of distortion for the Overdrive channel. 9. LOW: This adjusts the bass frequencies. Use this control to get the best sounding bass response for your instrument when using the Overdrive channel. 10. MID: This adjusts the midrange frequencies. Use this control to get the best projection and midrange tones for your instrument when using the Overdrive channel. 11. HIGH: This adjusts the treble frequencies. Use this control to attain a bright and lively sound for your instrument when using the Overdrive channel. 12. LEVEL: Use this control to adjust the output level of the Overdrive channel. 13. OVERDRIVE/CLEAN: Use this switch to select the Clean channel or the Overdrive and High Gain channels. With the switch in the out position, the Clean channel is selected. When the switch is pushed in, either the High Gain or Overdrive channel is selected, depending on the setting of the High Gain/ Overdrive switch [6]. 14. CLEAN LED: This LED illuminates when the Clean channel is selected. 15. VOLUME: Use this control to adjust the output level of the Clean channel. 16. LOW: This adjusts the bass frequencies. Use this control to get the best sounding bass response for your instrument when using the Clean channel. 17. MID: This adjusts the midrange frequencies. Use this control to get the best projection and midrange tones for your instrument when using the Clean channel. 18. HIGH: This adjusts the treble frequencies. Use this control to attain a bright and lively sound for your instrument when using the Clean channel. 19-21. EFFECTS: Use these controls to apply and adjust the DSP effects. Complete information on these effects is provided on page 7. 22. CD INPUT: Use this 1/8" stereo mini jack to connect the output from a CD player, MP3 player, laptop, etc., to the amplifier. The signal at this jack is summed into a mono signal, which is sent to the internal power amp circuit. Use the output level control for the signal source to adjust the signal for the proper mix with your guitar. 23. POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switch depressed). The switch illuminates when the amplifier is turned on. FlexWave65/112 Guitar Amplifier w/DSP and Channel Tracking The Rear Panel FOOTSWITCH 24 EXT DSP CHANNEL INSERT BANK A CLEAN / OD SPKR BANK B HIGH GAIN 100 VAC: 250V T2.5A 120 ...