Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
This special function footswitch has the capability to change the digital rverb presets remotely. The Digital Reverb Remote Switch is an optional accessory that allows the user to change the Digital Reverb "Type" setting from a remote location. The footswitch has two LED readouts, two increment buttons, and a select button to choose between the two settings chosen with the increment buttons. For correct footswitch operation, the Reverb "TYPE" control on the amplifier must be set to the “K” position. SPEAKER OUTPUTS (27) Provided for connection of external speaker(s). Minimum tota1 impedance is 4 ohms. IMPEDANCE SELECTOR SWITCH (28) Use to select the appropriate impedance of the speaker(s). For example, if two speakers of equal impedance are used, the switch should be set to one-helf of that value. If two 16 ohm cabinets are used, the impedance selector should be set to 8 onms. REVOLUTION™ ENGINEERING SPECIFICATIONS POWER AMPLIFIER SECTION Rated Power & Load: (Each channel) 150W RMS inio 16. 8, or 4 ohms/separately 130W RMS into 16. 8. or 4 ohms/both channels driven (260W RMS total) Power Clipping: (Typical each channel) (5% THD. 1 KHz. 120V AC line) 140W RMS into 16 8. or 4 ohms/both channels driven Frequency Response: +0. -1 dB 60 Hz to ¡5 kHz,
Instrumentos musicais - Revolution (1.61 mb)