Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
l The VL-XG voices edited with XG Editor Window of the “XGworks lite” can be saved as a part of the song data. . Note that the “program numbers” here are 001–128 and the “MIDI program change numbers” are 000–127. When selecting voices (programs) using an external MIDI device, subtract a value of “1” from the “program numbers” to match the “MIDI program change numbers.” 13 Voice Organization Selecting Banks Voice Organization Selecting Banks BANK MSB LSB BANK 112 97 or 81 112 BANK 113 97 or 81 113 BANK 114 97 or 81 114 BANK 115 97 or 81 115 BANK 116 97 or 81 116 BANK 117 97 or 81 117 BANK 118 97 or 81 118 BANK 119 97 or 81 119 PRESET 1 33 0 PRESET 2 33 1 CUSTOM 33 2 INTERNAL 33 3 14 Selecting Voices Selecting Voices Modular Synthesis Plug-in System n Selecting VL Voices When the PLG150-VL is properly installed on your synthesizer, the VL voices can be selected in the same way as the internal voices of the synthesizer. For more information see the manual of the synthesizer. The example displays used in the following explanations are all taken from CS6x. Therefore, the illustrations may be somewhat different from the LCDs of your instrument. 1 Press the VOICE button. Voice mode will be displayed. VCE Play) INT:001(A01)[Sq:Generation]. EQLow-G EQMid-G EQHi-G FLT-Rez EfHPF 2 Press the appropriate PLG button (PLG1 or PLG2, depending on which slot the PLG150-VL board has been installed to). VCE Play) PLG1:001(A01)[--:Plug-InVce]. EQLow-G EQMid-G EQHi-G ------- ------ 3 Then select the VL voice by pressing the appropriate BANK button and PROGRAM button. To select a different voice bank, simultaneously hold down the appropriate PLG button and turn knob C (or press the INC/ DEC buttons). The bank is expressed in two numbers: MSB and LSB. If a selected bank is not available, the bank letter indication in the display (A - H) will not change. 15 Selecting Voices XG Plug-in System Selecting Voices XG Plug-in System . The sound cards like the SW1000XG do not include “Performance Mode.” Please check the owner’s manual of the “mother” tone generator/sound card whether it includes the Performance Mode, or not. . The steps how to select a VL voice, set up the utilities and edit the VL part parameters shown below are explained using the MU128. Therefore, the illustrations may be somewhat different from the LCDs of your instrument. IMPORTANT When you use a sound card or a tone generator with no panel buttons... To select a VL voice, to set up the utilities and to edit the VL part parameters, you need to use a sequencing software and transmit the MIDI messages such as XG System On, Bank Select MSB/LSB, program change and parameter change to the “mother” sound card/tone generator, instead of following the steps below. Using the“XGworks lite,” properly installed in your PC (which is connected to the sound card/ tone generator) allows you to access the VL-XG voices through the Voice List dialog of the “XGworks lite.” n Selecting VL Voice 1 Select XG or PERFORM from the “mother” tone generator Sound Module Mode. When you select XG, Multi Play Mode will be engaged. When you select PERFORM, Performance Play Mode will be engaged. The VL voices can be selected only when “normal” is selected in the Part Mode. The VL voices can be played as a “part” in the XG Mode and as a “layer” in the Performance Mode. 2 Press SELECT button to place the cursor at the Bank Number. 3 Press VALUE button to select the Bank you want to use. Depending on the Bank selected, 112–119 (VL-XG), 000 (Preset 1), 001 (Preset 2), 002 (Cus tom) or 003 (Internal) appears at the Bank Number location on the LCD. 16 Selecting Voices Selecting Voices You may unintentionally select a bank number of the “mother” tone generator. Be sure to confirm that the VL voice icon is displayed on the LCD. 4 Press SELECT button to place the cursor at the Program Number. 5 Press VALUE button to select the Program Number (voice) you want to use. If an invalid Program Change Number is selected while one of the VL-XG Banks (112–119) is chosen, VL voice icon will be replaced with one of the XG voice icons. ¦ Designating the Part for the VL Voice 1 Press UTIL button to enter the Utility Mode. 2 Press SELECT button to place the cursor at PLUGIN. 3 Press ENTER. The following display appears. (If necessary) Press SELECT button to place the cursor at PLG150-VL. 4 Press ENTER. The System Parameter Edit display exclusive to the PLG150-VL appears. (If necessary) Press SELECT button to place the cursor at Part Assign. 17 Selecting Voices Selecting Voices In the XG Mode: 01–16, off In the Performance Mode: 01–04, off The VL voices cannot be assigned to several parts at the same time since the PLG150-VL is monophonic. When you use a sound card or a tone generator with no panel buttons... To select a part for the VL voice you need to use a sequencing software and transmit the following system exclusive message (part assign parameter) to the “mother” sound card/tone generator: F0 43 1n 4C 70 nn ss pp F7 (...