Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
The STAGEPAS 500 is a versatile, compact PA system consisting of two speakers and a mixer. In order to get the most out of your new STAGEPAS 500 and its sophisticated functions, we suggest you read through this manual thoroughly. Also keep it in a safe place for future reference. Features • Two-way, 10-inch (25 cm) speaker system The built-in speakers deliver high-quality powerful sound from an exceptionally compact cabinet. The scratch-resistant speakers are rugged enough for outdoor use. • Powered mixer The powered mixer is a convenient, high-performance all-in-one unit that includes EQ and reverb. With four monaural inputs and three stereo inputs, the STAGEPAS 500 can be connected to a wide range of instruments and devices. • Convenient storage The STAGEPAS 500 can be used in even the most cramped quarters, inside or outside, since the mixer is built into one of the speaker cabinets. The other speaker has a special compartment for storing speaker cables and microphones, letting you put all you need for your performance in one convenient place. Package Contents Two speakers (500S), mixer, panel, power cord, two speaker cables, Owner’s Manual (this booklet) NOTE: The mixer and the panel are installed in the speakers when the STAGEPAS 500 leaves the factory. n General Specifications Maximum Output Power 250 W + 250 W (±10 %)/4. @ 10 % THD at 1 kHz (SPEAKERS L/R) 200 W + 200 W/4. @ 1 % THD at 1 kHz (SPEAKERS L/R) Maximum Output Level 116 dB (1 m) Frequency Response (Nomimal output level @ 1 kHz) -3 dB, 0 dB, +1 dB @ 20 Hz-20 kHz (MUSIC/SPEECH=MUSIC) (MONITOR OUT) -3 dB, 0 dB, +1 dB @ 80 Hz-20 kHz (MUSIC/SPEECH = SPEECH) (REC OUT) -3dB, 0dB, +1 dB @ 20 Hz-20 kHz, 1 W Output (MUSIC/SPEECH=MUSIC, without Speaker EQ) (SPEAKERS L/R) Total Harmonic Distortion 0.5 % @ 20 Hz, 1 kHz, 20 kHz +14 dBu GAIN= nominal (MONITOR OUT, REC OUT) Hum & Noise (Equivalent Input Noise, Rs = 150., MIC/LINE = MIC) -106 dBu (CH1/2) -112 dBu (CH3/4) -65 dBu Residual output noise (SPEAKERS L/R) Crosstalk (1 kHz) -70 dB between input channels Phantom Voltage +15 V (CH1-4) LIMIT/COMP switch ON = Comp, OFF = Limit (CH1/2) Power Consumption 65 W Weight 24 kg (Speaker x 2 + Powered Mixer) Stereo Input Channel Equalization ±15 dB HIGH 10 kHz shelving LOW 100 Hz shelving n Speakers (500S) Enclosure 2 way bass-reflex type, Polypropylene, Black Crossover Frequency 4.0 kHz (LF: 12 dB/oct, HF: 12 dB/oct) Frequency Range 55 Hz-20 kHz (-10 dB) Speaker Unit LF: 10" (25 cm) Cone HF: 1" (2.54cm) Compression Driver n Speaker n Mixer Remove the mixer 1 Be sure that the mixer’s power switch is turned off. 2 Use a screwdriver or coin to turn each screw on the mixer from LOCK to OPEN until it clicks. 3 Securely hold the mixer’s handles to remove it from the speaker. Use only the mixer's handles when removing the mixer from the speaker and when carrying the mixer separate from the speaker. NOTE: The mixer can also be used when installed in the speaker. When you install the mixer into the speaker, make sure to match the indentations on the speaker cabinet to the corresponding parts on the mixer, and then turn each screw from OPEN to LOCK until it clicks. Turning the power on/off 1 Be sure that the mixer’s power switch is turned off. 2 Connect the included power cord to the [AC IN] jack, and plug the power cord into a power outlet. • To avoid any loud, unexpected noise from the speakers, first turn on the power to those connected devices that are closest to the sound source. Example: Sound source (CD player or instrument) > STAGEPAS 500 When turning off the power to the system, reverse the order described above. • Before turning on the power, set the LEVEL controls and MASTER LEVEL control to their minimum setting (zero). 3 Press the mixer’s power switch to the ON position. The POWER indicator lights. To turn the power off, press the power switch to the OFF position. The POWER indicator turns off. Troubleshooting Power does not turn on • Is the included power cord correctly connected to a power outlet? Power shuts down suddenly • Is the vent on the top panel of the mixer blocked? Since inadequate ventilation can result in overheating the mixer, the power may be turned off automatically and the mixer may reset itself. • Is the LIMITER flashes continuously? If the internal power amplifier section is excessively overloaded, the power may be turned off automatically and the mixer may reset itself. No sound is heard • Are external instruments (including a microphone) or speakers correctly connected to the mixer? • Are the LEVEL controls of all relevant channels and/or the MASTER LEVEL control set to appropriate levels? • Are the SPEAKERS L/R jacks connected to the included speakers (500S)? • Are the included speaker cables used? If the connector of a speaker cable other than the included speaker cable touches any metal parts such as the mixer's handle, no sound may result because of a short circuit. Use only the speaker cables included with the device. • Is the POW...