Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
The SR6300/8500 meets the high standards of Fender Musical Instruments providing years of trouble-free use. The SR6300/8500 mixers function perfectly for live bands, DJs, speaking engagements, religious meetings, • ACE-1515 600 W peak 15” woofer, Titanium compression driver, Advanced Concept Enclosure 2 speakers per side for a total of 4 speakers • SQUIER SQ-15 600 W peak, 15” woofer + side for a total of 4 speakers At Fender Audio, we are dedicated to providing innovative portable audio solutions. Fitting this philosophy, the SR6300/8500 powered mixers are rugged, full featured and portable. The SR6300/8500 mixers are designed to fit a variety of applications functioning as either a main/monitor system or stereo left/right system. The SR6300 and SR8500 have the following feature sets: • Each low noise channel offers: • Balanced XLR Mic input • 1/4” Line input • Rotary Stereo Pan • Rotary 3-Band EQ • Rotary DFX send level • Rotary Monitor send level • Level Control • -20dB pad switch • Switched 48 Volt Phantom Power for condenser Dual 7 band graphic EQ for Left / Right or Main / 16 Stereo Digital Multi FX(DFX) Stereo tape input with level control , 5-LED output level meters DFX Send Output with level control Stereo Aux Input with Level control Monitor output with level control Internal thermal and speaker short protection Rugged road carrying cabinet with reinforced thoroughly read this Owner’s Manual. You will find tips and connection details. The SR6300/8500 is packed with the following: • SR6300/8500 mixer • IEC power cable • Owner’s Manual • Fender Audio Warranty Card Please check for all contents before using the SR6300/8500. If something is missing or damaged please notify your dealer for replacement parts or service. . 7 C CCCCo oooon nnnnt ttttr rrrro ooool lllls ssss Channel Contr Channel ContrChannel Controls olsols 1. Pan – Controls relative level of input channel in Left and Right program mixes. To route the signal to both channels equally, leave this in the center. In Main/Monitor mode, only the line level L/R outputs will be affected. 2. Level – Controls the level of input channel sent to the Left and Right Program mixes; or if in Main/Monitor mode, controls the level sent to the Main program mix. 3. DFX – Adjusts the amount of signal level from the channel sent to the effects mix. 4. Monitor – Controls the level of input channel sent to the monitor mix. 5. Low – Bass tone control +/- 15 dB shelving at 80 Hz. 6. Mid – Midrange tone control +/- 12 dB boost/cut at 2.5kHz. 7. High – High tone control +/- 15 dB shelving at 8kHz. 8. Pad – Input channel pre-amp gain. Set to -20 dB for hot inputs that cause distortion. 9. Line Input – 1/4 inch TRS, suited for use with line level inputs such as high impedance microphones, keyboards, drum machines, outboard effects etc. This input accepts both balanced and unbalanced cables. 10. Mic Input – The 3 pin XLR balanced female connector is intended for low impedance microphones. Pins 2 and 3 provide phantom power for condenser microphones. Warning: connect only one device to each channel—do not use both line and mic inputs at the same time. Digital Ef Digital EfDigital Effects fectsfects 11. DSP Peak LED – The DSP peak indicator lights when the DSP circuit is clipping (distorting). If distortion is heard while this LED is lit, reduce the channel effects levels until the indicator goes dark. Increase DFX master to compensate. 12. Program – This knob selects a preset from the list of effects to the right. 13. Effects On/Off – This switch turns on or off the internal DSP. Main Section Main SectionMain Section 14. Master Graphic Equalizers - These 7 band equalizers consist of active band pass / reject filters spaced evenly across the audio range. Moving the sliders up and down boosts or cuts the gain up to 12 dB at the indicated frequency. 15. Amp Protection LEDs - These LEDs signify the protection circuit is active for the indicated amplifier; this may be due to a short circuit at the speaker terminals, or a high heatsink temperature. If lit, check speaker connections for a short circuit, or reduce master volume. 16. Level Indicators - These indicators show the overall level being output to the Left / Monitor or Right/Main master mixes. If the top, red LED is flashing, reduce the corresponding master volume to prevent possible damage to your speakers. 17. Left Master Volume - Adjusts the overall volume level for the left program mix. 18. Right Master Volume - Adjusts the overall volume level for the right program mix. 19. Meter Mode - This switch determines which mix is being monitored by the level indicators. . 8 S SSSSR RRRR6 66663 33330 00000 0000 / //// S SSSSR RRRR8 88885 55550 00000 0000 30. Effects Send Jack – This unbalanced, line level output jack is designed to feed the effects bus to an external effects processor. 31. Effects Return (L and R) Jacks – These unbalanced, line level input...
Este manual também é adequado para os modelos :Instrumentos musicais - SR8500 (5.59 mb)