Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO U S E R - S E RV I C E A B L E PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING RECORDING FROM MICROPHONE MIXING SOUND 1.Connect the microphone(s) to MIC socket and turn the switch on. 2.Set the FUNCTION selector appropriately and play the desired music source (TAPE/AM/FM/CDG/CD). 3. Insert a cassette tape into each cassette holder and depress the RECORD button. NOTE • The PITCH control must be adjusted to the centre position when recording. TO STOP RECORDING Press the STOP/EJECT button. For recording RECORD • USE ONLY NORMAL (TYPE I ) TAPES FOR RECORDING. 1. Insert a cassette into deck B. 2. Press the PAUSE button on deck B. 3. Press the RECORD button on deck B. 4. Prepare the source to be recorded and play it. (Refer to Tape Playback) (Refer to listening to the radio) Recording from Tape Recording from Radio 5. Press the PAUSE button again to start recording. PREVENT ACCIDENTAL ERASURE TROUBLE SHOOTING GUIDE Cleaning the tape heads To maintain optimum sound quality, clean the recording playback heads, erase head, pinch rollers and capstans regularly (every 10 hours of use). Use a cotton swab lightly moistened with cleaning fluid or denatured alcohol. Tape Care To prevent accidental erasure Use a screwdriver or pointed tool to break off the plastic tabs. To reuse Cover the tab openings with cellulose tape. Cleaning the unit Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. PROBLEMS No power supply. The cassette cannot be inserted. The tape does not run. The tape gets caught in the tape transport mechanism. Tape running is unstable. There is excessive noise, the sound quivers or there are breaks in the sound. The REC button cannot be pressed. Recording cannot be done. The previous recording cannot be erased. Disc in place but unit won't play. Disc skips The CD sound jumps. No graphics when playing CDG. No sound when playing CDG. No sound and no graphics when playing CDG. ITEMS TO CHECK • Is the power cord unplugged or loose? • Are batteries installed? • Are the batteries properly aligned? • Is the cassette facing the wrong direction when you try to insert it? • Is the PAUSE button depressed? • Is the pinch roller or capstan dirty? • Is there excessive slack in the tape? • Is there excessive slack in the tape? • Are the heads dirty? • Is a cassette inserted? • Is the cassette's erasure prevention tab broken off? • Are the heads dirty? • Is the erasure head dirty? • Make sure FUNCTION selector is set to CD/CDG. • Make sure disc label is facing front. • Make sure disc is clean. • Pause mode is activated. • Disc may be damaged or dirty; check disc • Make sure to unit is on a secure spot. Vibration or jarring can cause the disc to skip. • Is the lens or CD excessively dirty? • Is the unit subject to excessive vibration? • Are there any bad scratches on the CD? • Is the disc with Graphics or CDG marked on disc? • Is the function switch set to CDG position? • Is the video in cable plugged in or loose? • Is the TV set on mute mode? • Is the volume set to the minimum? • Is the audio in cable plugged in or loose? • Is the connection of video and audio cable plugged in correctly? • Are there any CDG inside the CD tray? • Is the graphics disc upside down? • Is the graphics disc excessively dirty? - 14 - MICROPHONE MIXING (KARAOKE) - continued VOCAL • Set the TAPE CHANNEL switch to VOCAL. • The background music will be cut. VOCAL CHANGER • Press the VOCAL CHANGER to ON, and the TAPE CHANNEL switch to STEREO. • The singer's voice will be cut out when you sing into the microphone. Once you stop singing, the singer's voice will be resumed. FEEDBACK In case a loud howling sound "feedback" is heard when a microphone is plugged in, try the followings: 1. Decrease the master volume or mic volume on the unit. 2. Move the hand microphone away from the unit. MUSIC • Set the TAPE CHANNEL switch to MUSIC. • The original singer's voice will be cut. STEREO • Set the TAPE CHANNEL switch to STEREO. • For normal playback of karaoke tape. 1. Set the FUNCTION switch to CDG/ CD. 2. Open the CD door. Place a disc in the center with the label side front. 3. Close the CD door gently, the total track number will be shown after a few seconds. 4. Press the CD PLAY/PAUSE button to play the CD, the CD PLAY/PAUSE indicator will light. TO PAUSE Press the CD PLAY/PAUSE button again. The CD PLAY/PAUSE indicator will flash. TO STOP Press the CD STOP button. The total number of tracks will be displayed. TO SKIP • Press the button to skip to the next track. • Press the button once to go back to the beginning of the current track. Press the button continuously to go back to the previous tracks. • Playback resumes from the selected track. TO SEARCH • Press and hold the and buttons to search thro...