Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
Although there are 5 LEDs on the front of the PA919PS only 3 lights function on this unit because there is only one receiver. The red LED indicates RF, the amber LED is for audio, and the green LED indicates power On. Full Wireless Operation As the transmitter on the PA919 and PA919SD is preset on channel 13, the receiver of the PA919PS is also set on 13. Any audio from the PA919SD can be transmitted to the PA919PS without wiring. There is no limit on the number of PA919PS speakers that can be used with the PA919 within a range of 150 feet. Audio Line Buss When linking one or two PA919PS to the PowerPro PA919SD via audio line, the PSC-50 XLR cable is connected to Audio Line Out XLR connector on the PA919SD. The other end is connected to Line In XLR on the Powered Companion Speaker. The Master Volume Control on the Audio Line panel of the master will adjust the PowerPro PA919SD as well as all the Powered or Passive Companion Speakers, however the loudness needs to be adjusted via the Master Volume Control on the PA919PS as well. Note: The mute switch on the PA919SD will silence all speakers connected to it by cable. However in the full wireless mode using the transmitter of the PowerPro the mute will have no effect. 17 Powered Companion Speaker PA919PS 1 Telescoping Handle 16-channel UHF wireless mic receivers Audio Line Out XLR Treble Control Bass Control Digital Master Volume Dual Steel Skid Guards A/C Power Socket Battery Low/Charge Indicators Green Power On Indicator Power On/Off Switch Voice Priority (Ducking) Switch 1/4” Phone Jack Speaker Out 1/4” Phone Jack Speaker Out Switched Speaker Mute Switch Integral Wheels 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 3 5 2 6 7 15 8 9 16 10 11 12 14 13 18 PA919PS Specifications Acoustic Speaker Compliment Woofer 10” Diameter, 40 Oz. Magnet, 2” Dia. Voice Coil, 6 Ohm Tweeter Compression Horn Driver, 12 Oz. Magnet, 1” Voice Coil, 8 Ohm Frequency Response 45Hz to 18KHz Amplifier 90 Watts RMS @ 5% THD (AC) Sound Pressure Level 94 dB, 1 Watt @ 1 Meter Power Sources 100-240 volt AC switchmode power supply and 12 volt 7 AH maintenance-free lead acid batteries (2) Wireless System Receiver: One 16-channel selectable UHF diversity wireless receiver 902 ~ 928 MHz (16 channels) Antennas is hidden internally. Microphone Transmitters Handheld wireless microphone or beltpack transmitters optional. Beltpack transmitter used with choice of hands-free headset, collar or lapel microphones. Audio Line Line level XLR jacks (2) providing for attaching PA916-SP speakers via cable. Features volume control for remote speaker(s). Mixer Panel Mixer panel accepts one wired XLR microphone. Voice music switch adds emphasis in the voice range for longer range projection. Line-In via dual RCA jacks with volume control. Line-Out via dual RCA jacks. Separate Bass and Treble tone controls. Voice priority switch activates “ducking circuit” which overrides music programs when microphone is used. Speaker mute switch mutes the main speaker plus all other speakers connected. Speaker out. Both switched and unswitched 1/4” phone jacks for connecting speakers. Dimensions 26 H x 12” W x 10” D Weight 52 lbs. Compliance FCC, CE, C-UL 19 Non-powered Companion Speaker PA916-SP Telescoping Handle 1/4” Phone Jack Speaker In Integral Wheels 1 2 3 1 The PA916-SP is connected to one of two outputs from the PowerPro or Powered Companion Speaker via SP-50 Cable with 1/4” phone plugs. Connecting to the “Speaker Out” jack will divide the power between the PowerPro PA919SD or PA919PS and PA916-SP. Connecting to the “Switched Out” will disconnect the internal speakers of the PA919SD and deliver all of the power to the PA916-SP. NOTE: There are five (5) LEDs on the front of the speaker, however they are disconnected because there is no internal amplifier or wireless receiver in this passive system. 2 3 Mechanical Notations Telescoping Handle and Wheels These are only intended for pulling the PowerPro over relatively smooth surfaces. Using the handle to lift or carry the unit or pulling up stairs will cause damage not covered by the warranty. Tripod Mount A recess is incorporated on the bottom of all PowerPro Speakers for mounting to the TP-50 tripod. 20 CAUTION ! RISK OF ELECTRIC SHOCK - DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QAULIFIED PERSONNEL. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. The lightening flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. ! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, SO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This product is not designed to function normally in strong electromagnetic fields. Consequently, the audio quality may degrade while the product is exposed to strong e...
Este manual também é adequado para os modelos :Instrumentos musicais - PowerPro PA919PS (1.18 mb)