Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
This model was built from the ground up to offer great tones and reliable performance. Inside this manual, you'll find valuable information about the cabinet's features as well as technical specifications. Become familiar with this information to get the best performance from your cabinet. We wish you many years of enjoyment with your Kustom G-115H. Product Contents These items are included with your G115H speaker cabinet. Be sure to contact your dealer if any items are missing. G115H Speaker CableHeavy Duty KAC-GRVSCC Removable Casters Warranty Brochure 2 Rear Panel 1Horn Attenuator: 3 4 HORN ATTENUATION dB Designed by Kustom Inc. Hebron, Kentucky MADE IN CHINA +1 tip, -1 sleeve INPUT/OUTPUT+1 and -1 used 0 1 2 35 6 7 8 10 12 16 MODEL: G115H XXXX-XXXXXX IMPEDANCE: 8 OHMS POWER: 450 WATTS RMS SENSITIVITY:97dB 1W/1M Speaker Input/Output: This is a “volume” control for the These jacks can be used as an inputhorn. To disable the horn, turn the and/or output. They accept standardknob counter clockwise until the Speakond type speaker cables. To indicator reaches :To set the horn connect a cable: Insert and twist one . for maximum output, turn the knob quarter turn clockwise until the release clockwise until the indicator reaches 0. button locks. To remove a cable: Pull back release button on cable connector, 2twist connector counter clockwise one Speaker Input/Output: These jacks can be used as an input quarter turn, and pull out connector. and/or output. The jacks accept a Note: When using these jacks as an standard .output to another cabinet, refer to the ” cable. Note: When usingthese jacks as an output to another Amplifier Loading Chart (page 4) for cabinet, refer to the Amplifier Loading important amplifier loading information. Chart (page 4) for important amplifierloading information. 3 Speaker Connection Diagram (Shown using the Kustom GROOVE 1300 amplifier) A Cabinet DIRECT OUTPUT SPEAKER OUTPUT EFFECTS LOOP SEND RETURN FOOTSWITCH TUNER OUT GROUND LIFT POST EQ PRE EQ DESIGNED IN USA MADE IN CHINA SERIAL NUMBER MODEL: GROOVE 1300 2001124 ATTENTION RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CHASSIS SURFACE HOT ATTENTION SUPERFICE DE CHASSIS CHAUDE BREAKER 15A A51 Cabinet B Amplifier Loading Chart Speaker cabinet loads (ohms) applied to the amplifier Cabinet A’s Impedance (ohms) open 16 8 5.33 4 3.20 2.67 2 Cabinet B’s Impedance open open 16 8 5.33 4 3.2 2.67 2 16 16 8.00 5.33 4.00 3.20 2.67 2.29 1.78 8 8 5.33 4.00 3.20 2.67 2.29 2.00 1.60 5.33 5.33 4.00 3.20 2.67 2.29 2.00 1.78 1.45 4 4 3.20 2.67 2.29 2.00 1.78 1.60 1.33 3.20 3.2 2.67 2.29 2.00 1.78 1.60 1.46 1.23 2.67 2.67 2.29 2.00 1.78 1.60 1.46 1.34 1.14 2 2 1.78 1.60 1.45 1.33 1.23 1.14 1.00 Total load on amplifier Note: Refer to amplifier specifications for proper loading information. This chart can help you determine what load (ohms) is present on the amplifier when using multiple cabinets. -To use this chart with two cabinets (A and B), find cabinet A’s impedance (ohms) column and cabinet B’s impedance row on the chart. The total load on the amplifier is shown in the box where they meet. For example: If cabinet A’s impedance is 8 ohms and cabinet B’s impedance is 4 ohms, the total load on the amplifier would be 2.67 ohms. -To use this chart with three or more cabinets, find the total load for two cabinets and then use the result for cabinet A’s impedance column. The third cabinet will then be used for cabinet B’s impedance row on the chart. Find the total load on the amplifier and repeat if more cabinets are used. For example (using 3 cabinets): If the first cabinet (cabinet A) has an impedance of 16 ohms and the second (cabinet B) has an impedance of 8 ohms, the total load would be 5.33 ohms. Using this load (5.33) as cabinet A’s impedance and a third cabinet’s (new cabinet B) impedance of 4 ohms, you would find that the total load on the amplifier is 2.29 ohms. Note: It is not recommended to use any combination of cabinets that has a resulting load in a shaded area of the chart. Alternate Connection Diagrams DIRECT OUTPUT SPEAKER OUTPUT EFFECTS LOOP SEND RETURN FOOTSWITCH TUNER OUT GROUND LIFT POST EQ PRE EQ DESIGNED IN USA MADE IN CHINA SERIAL NUMBER MODEL: GROOVE 1300 2 0 0 1124 ATTENTION RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CHASSIS SURFACE HOT ATTENTION SUPERFICE DE CHASSIS CHAUDE BREAKER 15A A518 Ohms 8 Ohms 8 Ohms 8 Ohms DIRECT OUTPUT SPEAKER OUTPUT EFFECTS LOOP SEND RETURN FOOTSWITCH TUNER OUT GROUND LIFT POST EQ PRE EQ DESIGNED IN USA MADE IN CHINA SERIAL NUMBER MODEL: GROOVE 1300 2 0 0112 4 ATTENTION RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CHASSIS SURFACE HOT ATTENTION SUPERFICE DE CHASSIS CHAUDE BREAKER 15A A518 Ohms 8 Ohms 8 Ohms 8 Ohms = Total Load On Amplifier = 2 Ohms 4 Total Load On Amplifier = 2 Ohms G115H Specifications Model G115H Bass guitar speaker cabinet Input Power 450 Watts RMS Impe...