Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Press the pedal to put the RC-2 into standby. The REC/PLAY/DUB indicator flashes rapidly Pressing the pedal once while the unit is in recording standby cancels recording. 4. Begin your performance. The RC-2 starts recording as soon as it receives audio input. 5. Press the pedal to stop recording. Playback of the recorded phrase begins simultaneously. 6. If you want to overdub onto the phrase, press the pedal. Each subsequent pedal press toggles between playback and overdubbing modes. * You can undo and redo the most recently recorded overdub (Undo/Redo; p. 15). 7. When you are overdubbing, press * Be sure to press the pedal second. * For more details on saving, refer “Saving Phrases (WRITE)” (p. 32) . 18 Recording After Setting the Tempo with the Pedal * For instructions on how to stop playback or overdubbing, refer to “Technique for Stopping Operation” (p. 6). 2. Turn the MODE knob to . INPUT 1. Select an empty phrase track. 6. Press the pedal to stop recording (the phrase plays back after you stop). Lights in green Play. Lights in yellow Lights in green Press twice Light goes off 8. Press the pedal twice to stop playback. Press the pedal to stop overdubbing (the phrase plays back after you stop). 7. Press the pedal to start overdubbing. 3. Press the pedal several times in time with the tempo. Press several times 4. Hold down the pedal for two seconds to set the tempo. Flashes rapidly in yellow Hold down two seconds Play. Lights in red 5. Press the pedal to start recording. Recording Recording . Turn the PHRASE empty phrase track 2. Set the MODE knob . You are now ready to set 3. Press the pedal several the tempo. Loop Quantize (p. 34) is enabled after The guide starts playing in time with the the volume level of this sound with the GUIDE 4. To use the current tempo setting, hold the pedal for at least two seconds. The REC/PLAY/DUB indicator flashes rapidly, and tempo setting is programmed. 5. Recording starts one measure after the pedal is pressed. The recording is stopped if the pedal is pressed once while this one measure is playing back. 6. Press the pedal to stop recording. Playback of the recorded phrase begins simultaneously. 7. If you want to press the pedal. Pressing the pedal toggles overdubbing modes. * You can undo and redo the overdubs p. 15). 8. When you are finished with overdubbing, press the pedal * Be sure to press the pedal two times within second. * For more details on saving, refer to “Saving Phrases (WRITE)” (p. 32) . 20 Creating Loop Phrases by Recording Audio from a CD/Digital Audio Player * For instructions on how to stop playback, refer to “Technique for Stopping Operation” (p. 6). AUX IN 5. Press the pedal to switch to recording standby mode. Lights in red 3. Play back the CD or digital audio player, and adjust the volume. 6. Play back the CD or Digital audio player (recording begins). 4. Cue up the CD/digital audio player to the desired location and pause playback. Flashes rapidly in red Press twice Light goes off 8. Press the pedal twice to stop playback. Lights in green 7. Press the pedal to stop recording (the phrase plays back after you stop). 2. Turn the MODE knob to AUTO. 1. Select an empty phrase track. Creating Creating . Turn the PHRASE empty phrase track The LOOP/ONE SHOT phrase track is empty. If tracks, or when the LOOP/to indicate that the memory is phrases to free up some memory p. 33). 2. Set the MODE knob to AUTO. 3. While playing the desired audio CD/digital audio player, adjust its volume the sound is not distorted. If you wish to set the tempo before recording, press TAP TEMPO button several times in time with the tempo of the phrase you are going to record. * For more details on setting the tempo, refer to “Setting the Tempo” (p. 35) . * If you are recording a phrase with a time signature other than 4/4, set the time signature now ( p. 36) . 4. Cue up the CD/digital audio player to the desired start location and pause playback. This puts the CD/digital audio player into playback standby mode. 5. Press the pedal to put the RC-2 in recording standby mode. The REC/PLAY/Pressing the pedal standby cancels recording. 6. Start playback of the The RC-2 starts recording as soon * Recording may stop before you are s memory runs out. If this occurs, delete phrases ( p. 33) and try the operation again. 7. Press the pedal to stop recording. Playback of the recorded phrase begins simultaneously. * If the tempo has been set, Loop Quantize automatically adjusts the phrase length to the nearest measure unit at time the pedal is pressed. (“Loop Quantize”; p. 34). Because of this, a certain amount of time may be required from when you press the pedal until recording stops. * The minimum length of time required for a loop phrase is approximately 1.5 seconds. If the phrase you’ve recorded is shorter than that, the length of the phrase will be adjusted automatically, and then recording will stop. * The procedures described here use the RC-2’s AUTO mode to begin recording automatic...
Este manual também é adequado para os modelos :Instrumentos musicais - RC-2 (1.83 mb)
Instrumentos musicais - RC-2 (1.83 mb)