Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
3 PART NAMES AND FUNCTIONS (Refer to page 3.) (1) Top panel q Power operation switch (POWER) • The power turns on when the button is switched from the off position (.) to the on position (.). • The power turns off when the button is switched from the on position (.) to the off position (.). w MASTER BALANCE control • Adjusts the L/R balance of the MASTER output. e MASTER LEVEL control • Adjusts the level of the MASTER outputs. r BOOTH ASSIGN switch • Selects the source of the BOOTH output. t BOOTH LEVEL control • Adjusts the level of the BOOTH output. y SAMPLER ASSIGN switch • Use this to select the source for Sampler recording. u SAMPLER MODE/STOP knob • Use this to set the Sampler playback mode or edit the Sampler. • Push this knob during the Sampler playback or recording, the Sampler playback or recording is stopped. i SAMPLER A button • Push this button, the Sampler recording or playback starts. o SAMPLER B button • Use this to set the Sampler B point. – TABLE OF CONTENTS – Min. 2 cm z MAIN FEATURES ...............................................5 x INSTALLATION ...................................................5 c PART NAMES AND FUNCTIONS ................5 ~ 7 v CONNECTIONS..................................................8 b SPECIFICATIONS................................................9 n FADER START ..................................................10 m EFFECTOR........................................................11 , SAMPLER.........................................................12 . PFL (Pre Fader Level) .......................................12 .0 PRESET ............................................................13 2 ACCESSORIES Please check to make sure the following items are included with the main unit in the carton: qOperating instructions.......................................1 2 INTRODUCTION Thank you very much for purchasing the DENON DN-X1500S DJ MIXER. DENON proudly presents this advanced DJ MIXER to audiophiles and music lovers as a further proof of DENON’s non-compromising pursuit of the ultimate in sound quality. The high quality performance and easy operation are certain to provide you with many hours of outstanding listening pleasure. Min. 2 cm 12. PFL (Pre Fader Level) This feature provides a means to adjust the input level gain of each channel to avoid over loading. By making this adjustment in advance will insure a smooth transition between cross fades or channel fades. 13. Preset functions It is possible to customise the machine to your preference by saving your favourite setting to internal memory. For items found in the presets, please see page 13. Min. 2 cm Min. 3 mm ENGLISH ENGLISH A, B: • The channel source is assigned to A or B of the Crossfader. POST: • Select when you don’t assign the channel source into the Crossfader. ! 1 EFFECTS ASSIGN switch • Use this to select the source of the internal Effector. ! 2 MODE PARAMETER knob • Use this to set the effect mode and parameters. ! 3 EFFECTS WET/DRY control • Use this to adjust the ratio of original and effected sound. ! 4 EFFECTS ON/OFF button • Use this to switch the internal Effector function ON and OFF. ! 5 TAP button • TAP: When you push this button repeatedly, the AUTO mode turns off and starts measuring your Beats Per Minute (BPM) by tapping. • LOCK: When this button is pressed once while the auto BPM counter is operating, the data measured by the auto BPM counter is locked. • AUTO: When pushing the TAP button for 1 second, activates AUTO BPM mode. The measured BPM is displayed in the BPM display. • INPUT BPM: When the TAP button is pressed and held in for more than 2 seconds, the BPM input mode is set and the BPM value can be input directly with the MODE PARAMETERS knob !2 . When the button is pressed again, the BPM input mode is turned off. ! 6 CUE buttons • Pressing in any or all of the CUE buttons routes the respective source to the headphone and meter cue sections. Pressing multiple buttons makes it possible to derive mixed sound from the selected sources. ! 7 CROSSFADER START A, B switches • Use this to switch the Crossfader Start function ON and OFF. ! 8 Crossfader • Controls the relative output level from the summed A and B Mixes. When the fader is at its far left, only the A Mix is heard from the outputs. As the fader is moved toward the right, the amount of B Mix is increased and the amount of A Mix is decreased. When the fader is centered, equal amounts of A and B Mixes are routed to the outputs. Fully right is all B Mix at the outputs. ! 9 Source input fader (Ch. Fader) • Controls the level of the selected Input. @ 0 CROSSFADER CONTOUR control • Allows adjusting the “shape” of the Crossfader response from a gentle curve for smooth, long running fades, to the steep pitch required for top performance cut and scratch effects. @ 1 HEADPHONE output jack • Accepts 1/4” stereo headphone plugs. @ 2 HEADPHONE LEVEL control • Adjusts the volume for the headphones. @ 3 HEADPHONE PAN control • Serves two purposes...