Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
#JM9879 PRINTED IN CHINA SAFETY For Your Own Safety Read Instruction Manual Before Operating This EquipmentThe purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indicates a potentially hazardous situation which, if not avoided, MAYresult in minor or moderate injury. It may also be used to alert against unsafe practices. Indicates a potentially hazardous situation which, if not avoided, COULDresult in death or serious injury. Indicates an imminently hazardous situation which, if not avoided, WILLresult in death or serious injury. Thissymbolisusedtoalerttheusertouseful information about proper operation of the equipment.NOTICE Safety Instructions For Pneumatic Tools 1. READ THIS MANUAL. This tool may 4. WEAR HEARING PROTECTION. cause personal injury if used incor-Operating this tool for prolonged time rectly. This manual contains proper periods may damage your hearing. safety and operating instructions that Your risk depends on length and fremust be followed to reduce this risk. quency of use. To reduce your risk of 2. WEAR EYE PROTECTION. This this hazard, wear hearing protection. tool may throw small fragments dur-5. MAINTAIN SAFETY GUARDS. Your ing operation, which may cause seri-tool may be equipped with safety ous eye injury. Always wear ANSI guards or other structural compoapproved safety glasses or face shield nents designed to reduce the risk of to reduce your risk from this hazard. injury during operation. Never modify 3. WEAR A RESPIRATOR. This tool or operate this tool with any guards or may produce fine dust during oper-components removed or damaged. ation, which can cause respiratory 6. KEEP CHILDREN AWAY. Prevent injury if inhaled. Always wear a respi-children from injury by keeping them rator NIOSH approved for the type of away from this tool. Disconnect and material being processed. lock the tool away when not in use. Model H8209 14-Piece Air Tool Kit -1 7. AVOID ENTANGLEMENTS. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry, which may get caught in moving parts, when operating this tool. Wear a protective hair covering to contain long hair. 8. USE CORRECT AIR PRESSURE. Exceeding the maximum PSI rating of this tool may cause unpredictable operation or bursting. 9. DISCONNECT AIR PRESSURE before servicing, changing accessories, or moving to another location. Never leave this tool unattended when connected to air. 10. SECURE TOOLING. Always verify tooling is secure before operation. 11. SHARP SURFACES. DO NOT place hands near the tooling surfaces when in operation. 12. REMOVE ADJUSTING KEYS AND WRENCHES AFTER USE. These tools become dangerous projectiles if left on the tool when it is started. 13. AVOID FLAMMABLES. Do not use this tool around any flammables that may be ignited by sparks. 14. SECURE WORK. Use clamps or a vise to hold work when practical. It is safer than using your hand and frees both hands to operate tool. 15. MAINTAIN TOOLS WITH CARE. Keep tools lubricated and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 16. DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed. 17. CHECK FOR DAMAGED PARTS BEFORE USING. Check for binding and alignment of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect operation. Repair or replace damaged parts before operating. 18. USE GOOD LIGHTING. Keep work area well lighted. Dark work areas increase risk of accidental injury. 19. AVOID UNINTENTIONAL OPERATION. Always disconnect air when not in use, and do not carry tool with hand on trigger. 20. USE THE RECOMMENDED ACCESSORIES. Consult owner’s manual for recommended accessories. Using improper accessories may increase the risk of injury. 21. NEVER ALLOW UNTRAINED USERS TO USE THIS TOOL WHILE UNSUPERVISED. 22. IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING TOOL. Seek formal training or research books or magazines that specialize in pneumatic tools. 23. BE AWARE OF HOSE LOCATION. Hoses can easily become a tripping hazard when laid across the floor in a disorganized fashion. 24. DO NOT USE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL, OR WHEN TIRED. No list of safety guidelines is complete, because every work environment is different. Always consider safety first and use common sense. Failure to use this tool with caution and respect couldresultinseriouspersonal injury. -2- Model H8209 14-Piece Air Tool Kit Inventory Tool Oil Bottle Case Teflon Tape Blow Gun Tire Inflator 4mm Hex Wrench Air Hose Quick Coupler 1.2" Impact Socket Set Quick Connect Fittings 1.2" Impact Wrench Figure 1. Model H8209 ...