Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: catalogroom@westinghouselighting.com. NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1). WARRANTY INFORMATION This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed or implied. This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties. This warranty does not cover broken glass. If fixture is received with broken glass, please call Westinghouse Lighting for free replacement. This warranty does not cover costs of removing and re-installing the light fixture. If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or replace the fixture or refund the purchase price. WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY. Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase. For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing. NOTE: For fixture employing a grounded convenience outlet. This fixture employs a grounded type receptacle and is not intended for connection to a two wire ungrounded source of supply. Applicable only to portable lamps: To reduce the risk of electrical shock, all portable lamps have a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If plug does not fit, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully plugged into the extension cord. Do not alter the plug. 2 12 pg_W-135_EFS 6/8/07 6:23 AM Page 3 3 FIGURE 1. *NOT SUPPLIED Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture. *OUTLET BOX (B) GREEN GROUNDING SCREW (Q) WIRE CONNECTORS (P) GROUND WIRE *OUTLET BOX SCREWS (C) MOUNTING BAR (A) SIDE HOLE (R) NIPPLE 2 (G2) LOCK WASHER (F) CANOPY (O) GLASS SHADE (S) COVER (T) CHAIN (L) FIXTURE LOOP (J) FINIAL (V) SCREW COLLAR RING (M) SCREW COLLAR (N) BOTTOM BREAK (U) HEX NUT 1 (D1) HEX NUT 2 (D2) NIPPLE 1 (G1) COUPLING 1 (H1) COUPLING 2 (H2) FIXTURE COVER (I) FIXTURE BASE (K) MOUNTING NIPPLE (E) 12 pg_W-135_EFS 6/8/07 6:23 AM Page 4 MOUNTING AND WIRING INSTRUCTIONS NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2. Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1). 3. Thread hex nut 1 (D1) onto mounting nipple (E) approximately 1/4 inch and insert lock washer (F), then thread mounting nipple (E) onto mounting bar (A) and secure with hex nut 1 (D1). 4. Thread nipple 1 (G1) onto coupling 1 (H1). 5. Secure fixture ...
Este manual também é adequado para os modelos :equipamento de bombagem - W-135 (90.27 kb)