Positive Displacement Pump IMB036/0898 Conair positive displacement vacuum pumps are designed for long distance, high-volume material conveying applications. DESCRIPTION Each model employs a powerful, rotating lobe-type blower, protected by a vacuum relief valve (factory-set to 12 in. Hg) and belt driven by a three-phase motor with magnetic starter and overload protection. An integrated pump protection filter is included and all components are mounted on a rugged frame, housing an integrated exh

Our service department uses this information, along with the manual number, to provide help for the specific equipment you installed. Please keep this User Guide and all manuals, engineering prints and parts lists together for documentation of your equipment. Date: Manual Number: IMB036/0898 Serial number(s): Model number(s): DISCLAIMER: The Conair Group, Inc., shall not be liable for errors contained in this User Guide or for incidental, consequential damages in connection with the furnishing,

If you do have a problem, please complete the following checklist before calling Conair: . Make sure you have all model, serial and parts list numbers for your particular equipment. Service personnel will need this information to assist you. . Make sure power is supplied to the equipment. . Make sure that all connectors and wires within and between control systems and related components have been installed correctly. . Check the troubleshooting guide of this manual for a solution. . Thoroughly e

Incoming voltage and current must match the electrical specifications on the pump data plate and serial tag. Check for proper rotation of the pump after power has been connected and before operation. Install vacuum lines to loader stations and the dust collector. Connect the dust collector vacuum outlet to the pump inlet. INSTALLATION AND OPERATION NOTE: The pump inlet is equipped with a vacuum relief valve to prevent the vacuum from exceeding 12 in. Hg. Excessive vacuum will reduce the life of