Log:
Assessments - 3, GPA: 3.3 ( )

Instruções de Operação AmpliVox, Modelo VHF S1600

Fabricante : AmpliVox
Arquivo Tamanho: 341.39 kb
Arquivo Nome : 497bd28a-5d36-0834-61ae-02497424fb78.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


IL 60062 1 -800-AmpliVox The AmpliVox S1600 wireless microphone system is compact, lightweight and compatible with all AmpliVox and Perma Power Sound Systems currently being produced or that were producedsince 1961. The S1600 operates in an authorized VHF band and has a useful range of up to 200’ in line-of sight applications. Each S1600 system operates on two crystal-controlled, switch- selectable frequencies for clear clean transmission. “A” Channel “B” Channel T6: 171.105 MHz T7: 171.845 MHz The frequency appears on the back of each unit. Both transmitter and receiver must have the same, and both units must be set to either “A” or “B.” Note that two transmitters on the same frequency will not work with one receiver. However two or more receivers will work with the same transmitter The S1600 is offered with a choice of two microphones: The S2030 miniature cardioid condenser lapel microphone or the S2040 headset microphone. Before use, make certain you understand the function and operation of the system. RF INTERFERENCE Please note that wireless frequencies are shared with other radio services. According to the Federal Communications Commission regulations, “Wireless microphone operations are unprotectedfrom interference from other licensed operations in the band. If anyinterference is received by any Government or non-Governmentoperation, the wireless microphone must cease operation…” If you need assistance with operation of frequency selection, please contact your dealer or AmpliVox. Additionally There are models available for use in Canada. FEATURES & CONTROLS FEATURES & CONTROLS Flexible Antenna Power ON Indicator Phone Out Jack—connect this jack to amp Mike Out Jack Power ON/OFF Switch Channel Selector Switch 9V DC Power input Jack Transmitter Mike Input Jack Receiver Power ON Indicator Power ON/OFF Switch Channel Selector Switch S2030 Lapel Mic OPERATION OPERATION POWER SOURCE The transmitter and receiver are each operated by a 9V alkalinebattery. Before use, install a battery as shown. Make certain the battery is fully seated in its compartment so the cover slides in place easily. Battery life with alkaline batteries is approximately 8 hours ofoperating time. The receiver also features an external jack forconnecting a 9V DC power supply (not included). Ribbon for battery removal 9V DC battery Battery compartment cover TRANSMITTER OPERATION B) If there is a “dead spot” in a room, try a slight change of position or try changing frequencies. Each unit provides two selectable transmitting frequencies. 1) Switch the Frequency Selector Switch to the desired channel (A or B). 2) Belt clip on the back of the unit clips the transmitter onto a belt orthe transmitter simply can be put into a pocket. 3) Plug the microphone into the Mike Input Jack. 4) The microphone can be clipped to a necktie or other clothing, using the supplied clip. 5) Slide the power ON/OFF switch to the ON position (the LED indicator light will light). RECEIVER OPERATION Each u...

Este manual também é adequado para os modelos :
Fones de ouvido & microfones - VHF S1610 (341.39 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias