Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Lift the hook upward as shown in Figure 1. Twist the hook 180. ......................................................(counter clockwise) as shown in Figure 2.. Push the hook downward as shown in Figure 3. Hook the headset onto the desired ear. Adjust the angle of the headset until the microphone is pointing towards your mouth as shown in Figure 4. 180. Figure 2 Figure 1 Figure 3 Figure 4 Headset attachments Over-the-ear hook To remove the ear hook from the headset: Hold the headset with one hand and the ear hook with the other hand. Lift the ear hook up until it separates from the earpiece. Headset attachments Over-the-headband To attach the headset to the headband for wearing on the left or right ear: Remove any headset attachment currently connected to the headset. Insert the earpiece into the headband ring as shown in Figure 1. Push the earpiece towards the headband ring until it clicks into place as shown in Figure 2. Adjust the headband to fit your head. Adjust and rotate the angle of the headset until the microphone is pointing toward your mouth as shown in Figure 3. Ring Figure 1 Figure 2 Figure 3 NOTE: To wear on the other ear, rotate the headset within the headband ring. Headset attachments Over-the-headband To remove the headset from the headband: Hold the headset with one hand and the headband ring with the other hand. Twist and pull the headset until it separates from the ring of the headband. Headset attachments Behind-the-neckband The neckband ring is positioned for right-ear wearing when first purchased. To wear the headset on your left ear: Remove the ring from the neckband. Note the small opening in the plastic at the place where the ring meets the neckband. Then rotate the ring post up and through that small opening, as shown in Figure 1. 2. Snap the ring into the small socket at the end of the left arm of the neckband To attach the headset to the neckband for wearing on the left or right ear: Remove any headset attachment currently connected to the headset. Insert the earpiece into the neckband ring as shown in Figure 2. Ring Figure 1 Figure 2 Headset attachments Behind-the-neckband 3. Push the earpiece towards the neckband ring until it clicks into place as shown in Figure 3. 4. Place the neckband around your neck and over your ears. 5. Adjust and rotate the angle of the headset until the microphone is pointing toward your mouth as shown in Figure 4. Figure 3 Figure 4 Headset attachments Behind-the-neckband To remove the headset from the ring of the neckband: Hold the headset with one hand and the neckband ring with the other hand. Twist and pull the headset until it separates from the ring of the neckband. Operation 22 Headset operation Making a call Using the headset base as a stand-alone product (installation option 2): In order to make calls, you need to have a telephone which is already plugged into the same telephone line or a dial pad (TL7601, sold separately). When the headset base is plugged into the telephone wall jack (installation option 1 or 2): NO LIFTER MODE must be selected on the headset base (see page 11). Follow the instructions in your telephone user’s manual for making calls. Press ON/OFF on the headset at any time to join the call. After you join the call on the headset, you can hang up the telephone and continue the call on the headset. When the headset base is connected to a multiple line or digital business corded telephone (installation option 3): LIFTER MODE must be selected on the headset base (see page 11). Lift the corded handset from the telephone cradle. Follow the instructions in your telephone user’s manual for making calls. Press ON/OFF on the headset at any time to switch to the headset. The handset must be out of the cradle (not hung up) until you are ready to end your call. Operation 23 NOTES: For instructions on using the lifter, see the TL7000 user’s manual. Visit to download the manual. For instructions on using the dial pad, see the TL7601 user’s manual. ......Visit to download the manual. Headset operation Making a call Answering a call on the headset When the headset base is plugged into the telephone wall jack (installation option 1 or 2): Press ON/OFF on the headset. When the headset base is connected to a multiple line or digital business corded telephone (installation option 3): Lift the corded handset from the telephone cradle. Press ON/OFF on the headset at any time to switch to the headset. The handset must be away from the cradle (not hung up) until you are ready to end your call. NOTE: The headset base and headset do not have an external ringer. When you receive calls, the headset earpiece plays a ring tone. If you have telephones connected to the same telephone line as the headset base, you can rely on the ringers of those telephones to alert you to incoming calls. Headset operation Ending a call on the headset When the headset base is plugged into the telephone wall jack (installation opt...
Este manual também é adequado para os modelos :Fones de ouvido & microfones - TL7611 (7.39 mb)