Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
This size helps shape response with the warmth and transparency that are typical of other high-quality AKG models. Its design provides a very low self noise floor of 14-dB-A, along with a maximum level capability of 140 dB, producing an overall operating range in the studio of 126 dB. Through the 10dB pre-attenuation switch the operating range of the microphone may be shifted up to 150 dB for close-in pickup of very loud sound sources. A bass cut switch provides a gentle 6-dB per octave roll-off below 500 Hz, compensating for proximity effect in vocal recording. The capsule assembly is internally shock mounted for low handling noise, and an internal foam sheath minimizes breath noises and pops with minimal attenuation of high frequencies. Tailored for the modern studio, the C 3000 B has the typical AKG large diaphragm “signature contour,” a slight dip at 2.5 kHz followed by a rise at 5 - 6 kHz and 9 - 11 kHz. Its cardioid pickup pattern is extremely well controlled, providing excellent off-axis rejection across the entire frequency band. The H 100 elastic suspension mounting is an included accessory with the C 3000 B. Optional accessories include the B 18 battery power supply, and the W 414 wind screen, The microphone is transformerless and accepts phantom powering over the range from 9 volts to 52 volts dc. The C 3000 B is equally at home on-stage as it is in the studio. Specifications Transducer type: 1 in. (25 mm) large diaphragm pressure gradient Diaphragm material: Gold-sputtered mylar foil Frequency response 20 Hz to 20 kHz, (see frequency response curve) Sensitivity at 1 kHz: 25 mV/Pa (-32 dBV) Polar pattern: Cardioid Pre-attenuation: 10 dB Impedance: 200 ohms Recommended loading: >1000 ohms Equivalent noise level (A-weighted): 14 dB Sound pressure level for 0.5% THD: 140 dB (150 dB with 10 dB pre-attenuation) Dynamic range: 140 dB S/N ratio (A-weighted): 80 dB-A Power requirement: Phantom powering, 9 to 52 Vdc Environmental: Temperature: 14° F to 140° F (-10° C to 60° C) Output connector: 3-pin XLR-M Size: 2.217 in. diameter (57 mm); 6.29 in. length (160 mm) Net/shipping weight: 11.3 oz. (320 g) Included accessories: H 100 elastic mounting suspension Optional accessories: B 18 battery power supply W 414 wind screen Condenser Microphone H 100 Features • Large diaphragm format optimized for studio applications • Extremely wide dynamic range of 140 dB • Transformerless output for ultra low LF distortion • Response shaped for studio applications • Pre-attenuation (-10 dB) and LF roll-off switching provided Architects and Engineers Specifications The microphone shall be a 1-inch diameter condenser model of 6 dB per octave commencing at 500 Hz. The microphone shall with a single dedicated cardioid pickup pattern. The microphone’s operate with phantom power over the range from 9 Vdc to 52 Vdc. sensitivity shall be no less than 25 mV/Pa. The microphone’s The microphone shall have a diameter no greater than 2.24 inches equivalent noise level shall be no greater than 14-dB-A, and at an and a length no greater than 6.299 ...