Assessments - 0, GPA: 0 ( )

Fabricante : Lenovo Arquivo Tamanho: 915.71 kb Arquivo Nome : Língua de Ensino:

R50 series Setup Poster
Size : 11x14 inches
P/N 27R0825
Color : 1 color job = Black (PMS Process Black C)
(#Gray=45% Black, 20% Black)
12/10/2004
Font : IBM Fonts and Helvetica Neue Family
Material : 100 gsm gloss art paper (Use 100% recycled paper in only Japan. )
Blue line shows die-cut. DO NOT PRINT.
Please change the barcode No.
Installing Optional memory
You can increase the amount of memory in your computer.
You can get information about ThinkVantage Technologies
at any time by pressing the blue Access IBM button on your keyboard.
Note: Only use memory types supported by your computer. If you incorrectly install the optional memory or install an
unsupported memory type, a warning beep will sound when you try to start the computer. To replace the standard memory
that is accessed by removing your keyboard, refer to the procedure described within Access IBM.
Security
Some ThinkPad computers have an embedded security chip.
1 Install the optional SO-DIMM:
To learn about downloading the soft ware and enabling the chip, enter
"security chip" in the Access IBM keyword search field.
1
Touch a grounded metal object to reduce
8
Align the notch in the contact edge of the SO-DIMM
any static electricity in your body that could
with the divider in the socket. Firmly insert the
Access Connections
damage the SO-DIMM. Avoid touching the contact
SO-DIMM into the socket at an angle of 20 degrees
Some ThinkPad computers are equipped with a wireless LAN adapter.
edge of the SO-DIMM.
1 , and then pivot it downward until it snaps into
To learn more about configurating wireless LAN and other communication
place 2 .
adapters including your wired connections, enter "Access Connections"
2
Turn off the computer.
in the Access IBM keyword search field.
2
3
Disconnect the ac adapter and all cables from the
1
Migration
computer.
You can move data from your old computer to this ThinkPad.
Enter "migration" in the Access IBM keyword search field to learn about
4
Close the computer display and turn the computer
2
downloading data migration soft ware.
over.
IBM Help and Support
5
Remove the battery.
To learn about IBM Help and Suppor t, choose the Get Help & Suppor t
6
Loosen the screws on the memory slot cover, and
category in Access IBM.
1
then remove the cover.
* Additional unpacking notes:
1) Some models may contain items that are not listed.
2) If any item is missing or damaged, please contact your place of purchase.
9
Replace the memory slot cover.
3) Your computer features IBM Disk-to-Disk Recovery. Everything for recovering
Attention: Never use the computer with the
factory-installed files and applications is on your hard disk eliminating the need for
memory slot cover open.
a recovery CD. For more information, see "Recovering Pre-Installed Software" in
the Service and Troubleshooting Guide.
10 Replace the battery and re-connect the ac
adapter and cables.
7
If a SO-DIMM is already installed, remove it as
Your name:
shown. Save the SO-DIMM for future use.
Company name:
Model number:
Serial number:
Company or reseller service:
IBM service Web site:
IBM service number:
2 Verify proper installation of the optional SO-DIMM:
1 Turn on the computer.
2 Press the Access IBM button when prompted during startup.
3 Open the IBM BIOS Setup Utility by clicking "Access BIOS" under the "Configure" category or double-clicking
"Start Setup Utility."
© Copyright IBM Corporation 2004
4 Verify that the "Installed memory" item shows the total amount of memory installed in your computer. For example, if your
For Barcode Position Only
The following terms are trademarks of the IBM Corporation in the United States
or other countries or both:
computer had 256 MB of standard memory and you install an additional 512 MB SO-DIMM, the quantity shown in
IBM, ThinkPad, TrackPoint, ThinkLight, ThinkVantage, UltraNav, and UltraConnect.
"Installed memory" should be 768 MB.

Baixe o seu

Para fazer o download, introduza 2 dígitos :