Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
If this is the case, we recommend that the display be magnified. When the taskbar is hidden at the bottom portion of Acrobat® Reader, set the maximum display window size. If a printer is connected, we recommend printing the Reference Manual. The illustrations and display samples may not print with a high quality. Handling and Maintenance Usage Environment > Environment • Place the computer on a flat stable surface. • In use: Temperalure: 5 °C to 35 °C (41 °F to 95 °F) Humidity: 30% to 80% RH (No condensation) Not in use: Temperature: -20 °C to 60 °C (-4 °F to 140 °F) Humidity: 30% to 90% RH (No condensation) i Places not to use your computer • Such areas may result in damage to the computer. Areas exposed to direct sunlight Areas with electronic equipment These areas may interfere with your display or cause your computer to |l l| produce strange sounds. Areas with extremely high/low temperatures • Do not leave things near the computer that are sensitive to heat. During operation, the computer may become warm. Transporting Do not drop or hit your computer against solid objects. It is a good idea to make backup copies on floppy disks and carry them with you. Do not leave a floppy disk in the drive while transporting your computer. Do not carry your computer when it is ON. Remove all cables before transporting your computer. We recommend preparing a fully charged battery (and optional charger, if possible). When transporting spare batteries inside a package, briefcase, etc., it is recommended that the batteries be stored in a plastic bag. Do not place the computer upright. When the computer receives shock after falling, the hard disk or floppy disk drive, etc., may become inoperable. Do not carry the computer while the display is open, or carry it by gripping the display. Do not put anything (e.g., a piece of paper) between the display and keyboard. Always carry your computer with you. Never check it with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regarding their policy on this issue. Maintenance Areas excluding the display: Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing it. Display: Use a soft dry cloth like gauze to lightly wipe the display. Do not use benzene or thinner, or disinfectant-type alcohol. Do not directly use water, liquid detergents or spray-type cleaners. If liquid enters the computer, this may cause the computer to malfunction or become defective. CD-ROM • Do not allow CDs to become dirty or scratched. • Cleaning the CD using a CD disk cleaner (LF-K022DC) • Do not place or store CD in locations exposed to heat, direct is recommended once every 2 or 3 months, sunlight, humidity or dust. • Do not write on the surface of the CD with a ball-point pen or other writing instrument, or apply label on the CD. • Do not drop, bend, or place heavy objects on top of CDs. • If the CD is brought from a cold into a warm environment, moisture may form on the disc. Wipe this moisture off with a soft, dry, lint-free cloth before using the CD. After wiping the CD with a moist, soft cloth, wipe it with a dry cloth. Always wipe from the center toward the edge. 15 List of Error Codes The following is a list of the messages that BIOS can display. Most of them occur during POST. Sortie of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems. If your system displays one of the messages marked below with an asterisk (*), write down the message and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct the error. 0200 Failure Fixed Disk Fixed disk in not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup. Find out if the fixed-disk type is correctly identified. 0210 Stuck key Stuck key on keyboard. 0211 Keyboard error Keyboard not working. *0212 Keyboard Controller Failed Keyboard controller failed test. May require replacing keyboard controller. 0213 Keyboard locked - Unlock key switch Unlock the system to proceed. 0220 Monitor type does not match CMOS - Run SETUP Monitor type not correctly identified in Setup. *0230 Shadow RAM Failed at offset: nnnn Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. *0231 System RAM Failed at offset: nnnn System RAM failed at offset nnnn of in the 64k block at which the error was detected. *0232 Extended RAM Failed at offset: nnnn Extended memory not working or not configured properly at offset nnnn. 0250 System battery is dead - Replace and run SETUP The CMOS clock battery indicator shows the battery is dead. Rep...