Confirm that Product Recovery CD-ROM 2 has been inserted by opening the tray of the CD-ROM/DVD-ROM drive, and then close the tray and immediately press [OK], v--1- (To next page) PR Troubleshooting Troubleshooting Reinstalling Software After the reinstallation procedure completes, the following message will appear on the display. Ашбштттпйштъ All data on the whole HDD has been restored to (he factory default. After removing floppy disk and the Product Recovery CD-ROM, restart the computer and set up Windows again. Remove the Product Recovery CD-ROM and FIRST AID FD, then restart the computer by pressing ( Ctrl ) + CMD+CM) ■ тшошот Windows2000 install wizard will start after reboot. Restore process will execute more after Windows2000 install wizard. Restart the computer after removing floppy disk and CD. Remove the Product Recovery CD-ROM, then restart the computer by pressing fctrp) + fAiD+fPin. tW.indowslNJâ Restart the computer several times for Windows Preparation. If the message “Preinstallation completed successfully. Press any key to shut down/reboot.” is displayed, press any key. 11 When the message [Press to enter SETUP] is displayed, press ( F2 ) and then run the Setup Utility. If the password has been set, enter the Supervisor Password. 12 Press ( F9 1 At the confirmation message, select [Yes] and press C Enter). (The Setup Utility settings will return to their default values. Even the security settings with the exception of the password(s) will return to their default values.) Change the settings where necessary. 13 Press C F10). At the confirmation message, select [Yes] and press CEnteD. 14 Perform the setup procedure for Windows by following the instructions on the screen. page 11 Q3 Described on the right tWj ndöwsl98mWirdÄ2000> tWjndowslNJ# lWjndôws}2Q00> Set the Backup Disk and select [OK]. (If the Backup Disk has not been created, select [Cancel].) iWjndowslNiT# Setup Windows after reinstalling (7) The Software License Agreement will be displayed. After reading the agreement, select [I Agree]. Anqte)--- • If [I Disagree] is selected, the Windows setup will be aborted. • Moving the cursor (i^) or clicking buttons can be performed with the touch pad. (2) Select [Next]. (3) Input your name and organization, then select [Next]. (It is possible to omit the organization item.) (4) Input the Product ID written down in the column “Customer’s record” (Q^page 2) then select [Next], To move the cursor to a particular item, press C Tab ) or click the desired box. (5) Input your computer name and select [Next]. (I) Input an Administrator password and select [Next]. — ----------------------\ | Remember this password! If the password is for- 1 gotten, Windows NT cannot be operated. (7) Select [Next], (8) Select [Do not connect this computer to a network at this time], then select [Next]. (Settings can be made for a network even after Windows starts up. In this case, be sure to read [When Adding New Software or Hardware Components] in the Reference Manual [Technical Information].) • When establishing settings for a network: The settings will vary for different network environments depending on the network system being used. For more details, ask your system administrator or the person in charge of the network. Follow the on-screen instructions. The driver for the internal LAN port is in [c:\util\drivers\clan]. Be sure to select [Intel(R) PRO Adapter]. Л>оте> It takes several minutes for the necessary files to be copied. If the computer enters the ECO mode, the power to the LCD is automatically turned off. In this case, press a key unrelated to the direct triggering of a selection, likeCShift I 26 (9) Press [Restart Computer]. Selcct “Windows NT Workstation Version 4.00” and press I Enter ). (HÎ) Following the display, press ( Ctrl ) + C Alt ) + fDiP. Input the password set in step (?) and select [OK], then select [Close] at the [Welcome] display. • As the computer starts up, it will be necessary to input the password set in step (?). • Following this, if [Press any key to continue...] is displayed on the MS-DOS screen, press [Enter]. (1R) Install Touch Pad driver. (At the [Welcome], select [Next] and follow the onscreen instructions. When the installation completes, select [No, I will restart my computer later], and then select [Finish].) ® Install Intel (R) Speed Step (TM). (At the [Welcome], select [Next]. When the installation completes, select [No, I will restart my computer later], select [Finish].) (¿3) Follow the on-screen instructions and install ESS Allegro 1 Utility. (At the [Welcome] display, select [Next]. Confirm [Upgrade Drivers] is selected, then select [Next]. When the installation completes, select [No. I will restart my computer later], then select [Finish].) (jj$) Install Phoenix APM 2.0 for Windows NT. W...
