Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Compliance Notice - CE Mark Compliance Notice - CE Mark 73/23/EEC Low Voltage Directive with amendment 93/68/EEC 89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC This Notice is based upon compliance of the product to the following standards: EN60950 EN55022 EN61000-3-2 EN61000-3-3 EN55024 Ubereinstimmungserklarung - CE-Marke Diese Ausrustung erfullt die Anforderungen der unten angegebenen EC-Direktive: 73/23/EEC Niederspannungsdirektive mit Abanderung 93/68/EEC 89/336/EEC EMC-Direktive mit Abanderungen 92/31/EEC und 93/68/EEC Diese Erklarung beruht darauf, dass das Produkt die folgenden Normen erfullt: EN60950 EN55022 EN61000-3-2 EN61000-3-3 EN55024 Avis de conformite - Marque CE Cet equipement est conforme aux conditions des Directives de la Commission Europeenne mentionnees ci-dessous: 73/23/EEC Directive sur la basse tension y compris la modification 93/68/EEC 89/336/EEC Directive CEM y compris les modifications 92/31/EEC et 93/68/EEC Cet Avis se base sur la conformite du produit aux normes suivantes: EN60950 EN55022 EN61000-3-2 EN61000-3-3 EN55024 ENGLISH Thank you for purchasing the port replicator for the Panasonic CF-51 notebook computer series*. By connecting your peripheral devices to the port replicator, you can save yourself the trouble of having to connect and disconnect several cables every time you transport the computer. E * This port replicator cannot be used for other models. Parts Inclusion Port Replicator ......................... 1 (with expansion bus connector protective cap) Operating Instructions ............ 1 Specifications Item Description Power Supply Input DC 15.6 V [Do not use other than the specified AC adaptor (Model No. CF-AA1653A)]. Expansion Bus Connector 100-pin Physical Dimensions (Width . Height . Depth) 378 mm . 64 mm . 219 mm {14.9" . 2.6" . 8.7"} Weight Approx. 1.3 kg {2.9 lb.} Operating Environment Temperature / Humidity 5 to 35 °C {41 to 95 °F} / 30 to 80 % RH (No condensation) Refer to “Specifications” in the “OPERATING INSTRUCTIONS” accompanying the computer for information on the connectors and ports on the rear panel of the port replicator. Names and Functions of Parts The port replicator allows your peripheral devices to function exactly as if they were connected directly to the computer. (Refer to “Names and Functions of Parts” in the “OPERATING INSTRUCTIONS” accompanying the computer.) CAUTION Do not touch the expansion bus connector, pins or springs of the port replicator. Rear DC-IN JackLOCK Keyboard Port Mouse Port Parallel Port Serial Port Display Port USB Ports (3 ports) LAN Port Check whether the connectors are pointing up or down. A Kensington cable can be connected. For more information, read the manual that comes with the cable. Security Lock E Front/Right Side The protective cap from the expansion bus connector should be placed here when the port replicator is connected to the computer. (This will prevent it from getting lost.) Expansion Bus Connector Protective Cap (Accompanying the port replicator) Slide the lever all the way back to release the computer. Lever This connects to the expansion bus connector on the bottom of the computer. Be sure to keep it covered with the supplied protective cap when the port replicator is not connected to the computer. Cap Holder Expansion Bus Connector This operates identically to the power switch on the computer. Power Switch 6 E Connecting/Disconnecting CoCnonencntinegcting/Disconnecting CAUTION Do not connect or disconnect the port replicator while the computer is powered on or in the standby or hibernation mode. Do not use other than the specified AC adaptor (Model No. CF-AA1653A) and AC cord. Refer to the “Operating Instructions” accompanying computer for information on proper handling of the AC adaptor and AC cord. Power off the computer, and disconnect all cables from the computer. Connect the plug of the AC adaptor that came with the computer to the DC-IN jack of the port replicator and plug the other end into an AC outlet. 1 2 Remove the expansion bus connector protective cap and place it in the cap holder to prevent its getting lost. (The expansion bus connector protective cap is placed in the cap holder prior to shipment from the factory.) Slide the computer onto the port replicator, align the back of the computer with the back of the port replicator, and then slowly lower the computer to connect the expansion bus connector. 4 3 Do not connect the computer to a port replicator while the computer is connected to the AC adaptor or other cables. Do not attempt to make connections if there is any object between the computer and the port replicator. Doing so could damage the computer and the port replicator. CAUTION CAUTION 7 E While connecting the computer to the port replicator: Do not attempt to move the port replicator. Do not open the display wider than necessary (180° or more). It is impossible to remove t...