Assessments - 4, GPA: 3.3 ( )

Fabricante : Toshiba Arquivo Tamanho: 2.94 mb Arquivo Nome : Língua de Ensino:

2 Select Stand By from the drop-down list of options. 3 Click OK. The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light blinks amber to indicate the machine is in Standby mode. If you power down using the Standby command and the battery discharges fully, your unsaved information will be lost. Be sure to save your work often. Going into Standby mode more quickly You can also put the computer into Standby mode in three ways: . By pressing the hot key combination Fn+F3. . By pressing the power button . By closing the display panel. To put the computer into Standby mode when you slide the power button or close the display panel, you must preset the mode: 1 Click Start, Control Panel. The Control Panel window appears 2 Click Performance and Maintenance. Learning the Basics Learning the Basics Using Standby 3 Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window 4 Click to select a profile. 5 Click the Setup Action tab. Sample Full Power Properties window Learning the Basics Learning the Basics Toshiba’s online resources 6 Select Standby for the options you want. . When I press the power button Set this option to Standby so that the computer will go into Standby mode when you press the power button. . When I close the lid Set this option to Standby so that the computer will go into Standby mode when you close the display panel. 7 Click Apply. 8 Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Standby To start up the computer from Standby mode, slide and release the power button until the on/off light changes to green. The computer returns to the screen you were using. If you put the computer in Standby mode by closing the display panel, you can start the computer again by opening the display panel. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more information, see “Contacting Toshiba” on page 232. Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling. Running the computer on battery power The computer contains a removable Lithium-Ion (Li-Ion) high-capacity battery that provides power when you are away from an AC outlet. You can recharge it many times. 102 Mobile Computing Mobile Computing Running the computer on battery power Battery Notice Battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. See "Detailed Specs" for specific battery measurement test. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power. After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see the accessories information that shipped with your computer or visit the Toshiba web site at To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged. Please see “Maximizing battery life” on page 120 for procedures. If the computer is continuously operated on AC power, either through an AC adapter or a docking station (if applicable to your system), for an extended period (more than a month), the battery may fail to retain a charge. This may shorten the life of the battery, and the battery light may not indicate a low-battery condition. NOTE For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power. In addition, your computer’s Power Saver utility can be used to select a power level setting for DVD playback. The computer also has an internal real-time-clock (RTC) battery. Mobile Computing Mobile Computing Running the computer on battery power The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date...

Baixe o seu

Para fazer o download, introduza 2 dígitos :