Log:
Assessments - 4, GPA: 4.5 ( )

Instruções de Operação Toshiba, Modelo Tecra TE2300

Fabricante : Toshiba
Arquivo Tamanho: 2.77 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


If you are connecting a mouse after you have started using the computer, begin at step 1. Otherwise proceed to step 2. Connecting Other External Devices Connecting Other External Devices 1 Click Start, Turn Off Computer, then select Turn Off. The operating system shuts off the computer. 2 Attach the PS/2 mouse cable to the PS/2 port on the computer. HINT: Using an optional Y-cable allows you to connect a PS/2 mouse and a PS/2 keyboard to the PS/2 port simultaneously. 3 Refer to your mouse documentation for configuration information. To use both the PS/2 mouse and the AccuPoint II, set this up when you have loaded the operating system. Using a PS/2 mouse simultaneously with AccuPoint II When you connect a PS/2-compatible mouse to the PS/2 port, you may use the mouse, the AccuPoint II, or both. When connecting any PS/2 device, turn off your computer to prevent any possible hardware damage. NOTE If you connect a PS/2 mouse to the computer while it is in Standby mode, you will not be able to use the mouse when you turn the computer on. 1 Click Start, Control Panel, then Printers and Other Hardware. 2 Click the Toshiba HWSetup icon. 3 Select the Pointing Devices tab. 4 Under Pointing Devices Options, select one: 58 58 58 . Auto-selected — configures the PS/2 mouse to work when it is connected at power on, or the AccuPoint II to work otherwise. Auto-selected is normally the default option. . Simultaneous — configures both the AccuPoint II mouse and PS/2 mouse to work with the computer at the same time. You must reboot the computer for the settings to take effect. HINT: When Auto-selected is the default, the computercan not detect a PS/2 mouse if you connect it after booting the computer. This can be changed in Toshiba Hardware Setup. 5 Click OK. A message appears stating “The changes will take effect next time the machine is rebooted. Reboot the machine now?” 6 Click Ye s . The computer reboots, and the PS/2 mouse is activated. Connecting Other External Devices Connecting Other External Devices Connecting a local printer NOTE Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a local printer. NOTE You must supply the proper printer cable. If one did not come with your printer, you may purchase one from an electronics or computer store. If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable. Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. Never connect the printer cable while the computer’s power is on. Doing so may damage the printer, the computer, or both. The following instructions assume you have a parallel printer. To connect the printer: 1 If the computer is on, turn it off. 60 60 60 If the computer is connected to an AC power source, disconnect the AC adapter. Never connect the printer cable while the computer is on. Doing so may damage the printer, the computer, or both. 2 Connect the printer cable to the printer and to the computer’s parallel port. Use the printer cable illustration as a connection guide. To the computer To the printer Identifying the ends of a parallel printer cable 3 Plug the printer’s power cable into a live electrical outlet. 4 See your printer documentation for additional configuration steps. Setting up your printer Setting up a printer usually involves selecting a printer driver. This special program acts as a translator that turns your document into a form the printer can understand. Connecting Other External Devices Connecting Other External Devices If you are using any non-Windows® programs, set up a printer driver for each of those programs. Refer to your program’s documentation for more information. TECHNICAL NOTE: If you have the manufacturer’s disk that came with your printer, you can use it to install the printer on your computer. The manufacturer’s disk may include additional drivers and fonts. TECHNICAL NOTE: Some printers require a specific installation process. In this case, the Windows® XP operating system Add Printer Wizard will display an error message. If this happens, refer to your printer installation guide for further instructions. To set up a printer with the Add Printer Wizard: 1 Click Start, and click Printers and Faxes. The operating system opens a Printers and Faxes window. Sample Printers and Faxes window 62 62 62 2 Click Add Printer. The Add Printer Wizard appears. Sample Add Printer Wizard dialog box 3 Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows® XP operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. 4 If the printer you are setting up: . Is not connected to a network, select Local printer attached to this computer...

Este manual também é adequado para os modelos :
Notebooks - TE2300 (2.77 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias