Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Notebooks - VGN-P11ZR_W (3.02 mb)
Notebooks - VGN-P11ZR_W (3.94 mb)
Notebooks - VGN-P11ZR_W (2.95 mb)
Notebooks - VGN-P11ZR_W (1.43 mb)
Facilidade de uso
. Be sure to use the supplied noise canceling headphones. You can plug the headphones supplied with a Walkman® to your computer but the noise canceling function of the computer will not work well with such headphones. 7272nNUsing Peripheral Devices Connecting the Noise Canceling Headphones To connect the noise canceling headphones 1 Plug the headphones cable into the headphones jack i. The icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message pops up from the icon. . When the icon is on the taskbar, the noise canceling function is disabled. Right-click the icon and select Enable Noise Canceling Function from the menu. If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 74) to change the settings. 7373nNUsing Peripheral Devices Adjusting the Effect of the Noise Canceling Function The noise canceling headphones supplied with your computer is configured to yield the optimum effect by default. If you feel that the noise canceling function is not fully in effect, you may be able to adjust the effect with the Noise Canceling Control slider on the Noise Canceling Headphones window. To adjust the effect of the noise canceling function 1 Right-click the icon on the taskbar and select Settings. The Noise Canceling Headphones window appears. . If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 74) to change the settings. 2 Drag the Noise Canceling Control slider toward Mic+ or Mic- to select your desired noise canceling level. . The slider should be at the center of the range to yield the optimum level. Dragging the slider all the way to Mic+ does not bring the noise canceling function fully into effect. 3 Click Apply. 4 Confirm that the noise canceling effect is satisfactory and then click OK. 7474nNUsing Peripheral Devices What to do if the icon and the balloon do not appear When the noise canceling function icon ( / ) is not on the taskbar and the balloon message does not pop up from the icon, change the noise canceling function settings. To display the balloon message and the icon 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Manage audio devices under Sound. 4 On the Playback tab, double-click the speakers or headphones icon. 5 Click the Enhancements tab. 6 Click to select the Noise Canceling Function check box and click Modify Settings. . If the Disable all enhancements check box is selected, click to cancel the check box. 7 Click to select the Display an icon for the noise canceling headphones in the task tray or Display a message when noise canceling headphones are connected check box. 8 Click OK. 7575nNUsing Peripheral Devices Connecting a Display/LAN Adapter Connecting a display/LAN adapter (supplied with selected models only) expands connectivity to your computer. Locating Ports on the Display/LAN Adapter A Monitor port (page 80) B Network (Ethernet) port (page 51) C Socket for attaching to the AC adapter (page 124) 7676nNUsing Peripheral Devices Connecting the Display/LAN adapter to Your Computer To connect the display/LAN adapter to your computer ! Do not move your computer while the display/LAN adapter is connected, as it may disconnect the display/LAN adapter and cause damage to both units. Slide out the I/O plug (1) in the direction of the arrow and route the I/O plug cable (2) to the right of the tab (3). Connect the I/O plug (4) to the I/O port (5) on the computer. 7777nNUsing Peripheral Devices Connecting an Optical Disc Drive To use optical CDs and DVDs with your computer, you need to connect an external optical disc drive (not supplied) to your computer. Connecting an Optical Disc Drive ! Be sure to connect an external optical disc drive before you launch any preinstalled disc operation program. To connect an optical disc drive 1 Plug the power cord (if any) of your external optical disc drive (not supplied) (1) into an AC outlet. 2 Choose the USB port (2) you prefer to use. 3 Plug one end of a USB cable (not supplied) (3) into the USB port, and the other end to the optical disc drive. See the manual that came with your external optical disc drive for the detailed instructions on connecting the USB cable to the drive. 7878nNUsing Peripheral Devices Disconnecting an Optical Disc Drive You can disconnect an optical disc drive when your computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Sleep or Hibernate) may cause the computer to malfunction. To disconnect an optical disc drive . To disconnect an optical disc drive when your computer is off, skip steps 1 to 5. 1 Close all software applications accessing the optical disc drive. 2 Double-click the Safely Remove Hardware icon on the taskbar. 3 Select the optical disc drive you want to disconnect. 4 Click Stop. 5 Follow the on-screen instructions to disconnect the optical disc drive. 6 Disconnect the optical disc drive from the computer. 7979nNUsing Periph...
Este manual também é adequado para os modelos :Notebooks - VGN-P11Z_G (1.73 mb)
Notebooks - VGN-P11Z_Q (1.73 mb)
Notebooks - VGN-P11Z_R (1.73 mb)
Notebooks - VGN-P11Z_W (1.73 mb)