Assessments - 1, GPA: 5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
The port replicator can be powered only with the AC adapter supplied with your computer. Do not remove the AC adapter from the port replicator or the AC outlet when using the port replicator; this may cause data damage or hardware malfunctions. Attaching your computer to the port replicator If your computer is equipped with a port replicator, proceed as follows : 1Disconnect all peripherals from the computer. 2Plug the cable attached to the AC adapter (1) into the DC In port (2) on the port replicator ( 3). 3Plug the power cord (4) into the AC adapter and an AC outlet. 4Open the port replicator cover. 5Slide out the front lever. 6Align the bottom connector of the notebook with the connector on the port replicator and push down until it clicks into place. 7Turn on the notebook. . Use the AC adapter that comes with your notebook or the optional Sony adapter. Disconnecting your computer from the port replicator To disconnect your computer from the port replicator, proceed as follows: 1Stop the connected periperals. 2Push the release levers (1) at the same time. 3Lift the computer away from the port replicator. 4Close the port replicator connector cover on the bottom of your computer. . It is extremely important to close the port replicator connector cover after removing your computer from the port replicator. If the cover is left open, dust may get inside and damage the computer. To disconnect your port replicator completely from the mains voltage, unplug the AC adapter. Connecting an external displayYou can connect an external display to your computer. For example, you can use your computer with a computer display or a projector. . Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. Connect the power cord after connecting all other cables. Turn on the peripherals, then turn on your computer. Connected external displays are used as second screens. On Windows systems only, you can also use an external display to set up a virtual desktop. Connecting a computer displayYou can connect a computer display (monitor) either directly to your computer or via the (optional) port replicator. To connect a computer display, proceed as follows: 1If you want to connect a VGA monitor, plug the display cable (1) (not supplied) on the notebook or on the port replicator. 2If you want to connect a TFT/ DVI monitor, plug the display cable (not supplied) into the DVI- D connector on the port replicator. 3If necessary, plug one end of the display’s power cord ( 3) into the display, and the other end into an AC outlet. . DVI-D stands for Digital Visual Interface - Digital. It is a kind of DVI connector that only supports digital video signals, so no analogue video signals. It has 24 pins. A DVI- I connector ( Digital Visual Interface - Integrated) supports digital video and analogue video signals. It has 29 pins. You can not connect a DVI- I to VGA cable to a DVI- D connector! Connecting a multimedia computer displayYou can connect the computer to a multimedia computer display that includes built-in speakers and a microphone. To connect a multimedia computer display, proceed as follows: 1Plug the display cable ( 1) into the monitor/ VGA connector ( 2) on the computer. 2Plug the speaker cable ( 3) into the headphone connector ( 4) on the computer. 3Plug the microphone cable (5) into the microphone connector (6) on the computer. Connecting a projectorYou can connect a projector (such as the Sony LCD projector) directly to your computer or via the port replicator. To connect a projector, proceed as follows: 1 Plug the RGB signal cable (1) into the monitor/ VGA connector (2) identified by the symbol. 2Plug the audio cable (3) (not supplied) into the earphone connector (4) identified by the symbol. 3Plug the RGB signal cable and the audio cable into the connectors of the projector (5). 4Connect the power cord (6) of the projector into an AC outlet. . Under certain circumstances, you may not be able to display the computer LCD screen and an external display or a projector at the same time. You can toggle the output between the computer LCD-screen and the external monitor by pressing the key combination
Notebooks - VGN-S1HP (1.06 mb)
Notebooks - VGN-S1VP (1.06 mb)