Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Therefore, you can start it by pressing the Lenovo Care button, F11, or Enter key when prompted during startup. After the Rescue and Recovery workspace opens you can perform a recovery operation, even if you are unable to start Windows. Chapter 5. Upgrading and replacing devices Upgrading and replacing devices -- - - - - - - - - --- - - - - - - - - --- - - - - - - - - --- - - - - - - • Replacing the battery • Important: Read Chapter 7. “Safety, use, and care information” before replacing the battery. • Danger: Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. Chapter 5. Upgrading and replacing devices To replace the battery 1 Turn off the computer, or enter hibernation mode. Then disconnect the AC adapter and all cables from the computer. • Note: If you are using an ExpressCard, the computer might not be able to enter hibernation mode. If this happens, turn off the computer. 2 Close the computer display, and turn the computer over. 3 Unlock the manual battery latch ... Holding the spring-loaded battery latch in the unlocked position , remove the battery pack in the direction shown by arrow ... 32 2 1 1 Chapter 5. Upgrading and replacing devices 4 Install a fully charged battery. 5 Slide the manual battery latch to the locked position. 6 Turn the computer over again. Connect the AC adapter and the cables to the computer again. • Upgrading the hard disk drive • Important: Read Chapter 7. “Safety, use, and care information” before replacing the hard disk drive. You can increase the storage capacity of your computer by replacing the hard disk drive with one of greater capacity. You can purchase a new hard disk drive from your reseller or Lenovo marketing representative. • Notes: • Replace the hard disk drive only if you upgrade it or have it repaired. The connectors and bay of the hard disk drive were not designed for frequent changes, or drive swapping. • The Rescue and Recovery workspace and the Product Recovery program are not included on an optional hard disk drive. Chapter 5. Upgrading and replacing devices 67 The drive is very sensitive. Incorrect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk drive, make a backup copy of all the information on the hard disk, and then turn the computer off. Never remove the drive while the system is operating, in sleep mode, or in hibernation mode. To replace the hard disk drive, do the following: 1 Turn off the computer; then disconnect the AC adapter and all cables from the computer. 2 Close the computer display, and then turn the computer over. 3 Remove the battery. 4 Remove the screws that secure the hard disk drive slot cover.. . Attention: Handling a hard disk drive .. Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that absorbs the physical shock. .. Do not apply pressure to the cover of the drive. .. Do not touch the connector. .. Chapter 5. Upgrading and replacing devices 5 Remove the cover ... 1 2 6 Pull the tab in the direction shown by arrow . 3 Chapter 5. Upgrading and replacing devices 7 Take out the hard disk drive secured in a metal frame . 4 8 Remove the screws and detach the metal frame from the hard disk drive. 9 Attach the metal frame to a new hard disk drive; then tighten the screws. 0 Put the hard disk drive gently into the hard disk drive bay with the tab facing upwards and the connectors facing each other; then push it firmly into space. A Reinstall the cover of the hard disk drive slot. B Reinstall the screws. C Reinstall the battery. D Turn the computer over again. Connect the AC adapter and the cables to the computer. 69 70 Chapter 5. Upgrading and replacing devices .. Removing the optical drive To remove the optical drive, do the following: 1 Remove the screw shown in the figure.. . 2 Gently pull the optical drive out.. . Important: Read Chapter 7. “Safety, use, and care information” before removing the optical drive. .. .. 2 1 Chapter 5. Upgrading and replacing devices • Replacing memory • Important: Read Chapter 7. “Safety, use, and care information” before replacing memory. Increasing memory capacity is an effective way to make programs run faster. You can increase the amount of memory in your computer by installing a double data rate (DDR) 2 synchronous dynamic random access memory (DRAM) unbuffered small outline dual inline memory module (SO-DIMM), available as an option, in the memory slot of your computer. SO-DIMMs with different capacities are available. • Note: Use only the memory types supported by your computer. If you incorrectly install the optional memory or install an unsupported memory type, a warning beep will sound when you try to start the computer. To install an SO-DIMM, do the following: 1 Touch a metal table or a grounded metal object. This action reduces any static electricity in your body, which could damage the SO-DIMM. Do not touch the contact edge...
Este manual também é adequado para os modelos :Notebooks - G530 Laptop (Lenovo) (2.79 mb)