Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Computrace®
NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be allowed.
Allows you to enable or disable the Execute Disable mode of the processor.
CPU XD Support
Default setting: Enabled
Performance
Option
Description
Multi Core Support
Enables or disables multi-core support for the processor.
Intel® SpeedStep™
Enables or disables the Intel SpeedStep feature.
Power Management
Option
Description
Wake on AC
Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Allows you to set the time at which the computer must turn on automatically.
You can set the of days, if any, when you would like the system to turn on automatically. The settings are Disabled, Everyday, or
Auto On Time
Weekdays.
Default setting: Off
Allows you to enable or disable the ability of USB devices to wake the computer from Standby.
USB Wake
Support
This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the BIOS
will remove power from all of the USB ports to conserve battery power.
Allows the computer to turn on by a special LAN signal or from Hibernate state when triggered by a special wireless LAN signal. Wake-up
from the Standby state is unaffected by this setting and must be enabled in the operating system.
l
Disabled — Do not allow the system to power on when it receives a wake-up signal from the LAN or wireless LAN.
Wake on
l
LAN Only — Allow the system to be powered on by special LAN signals.
LAN/WLAN
l
WLAN Only — Allow the system to be powered on by special WLAN signals.
l
LAN or WLAN — Allow the system to be powered on by special LAN or wireless LAN signals.
The factory default setting is Off.
Allows you to enable or disable the ExpressCharge feature.
ExpressCharge
NOTE: ExpressCharge may not be available for all battries.
Allows you to enable or disable the battery charger. If disabled, the battery will not lose power when the system is connected to an AC
adapter but it will not charge either.
Charger Behavior
Default setting: Charger Enabled
POST Behavior
Option
Description
Allows you to enable or disable the BIOS warning messages when you use certain power adapters. The BIOS displays these messages if
Adapter
you attempt to use a power adapter that has too little capacity for your configuration.
Warnings
The factory default setting is Enabled.
Allows you to select one of two methods to enable the keypad that is embedded in the internal keyboard.
l
Fn Key Only — The keypad is only enabled when you hold down the
l
By Num Lk — The keypad is enabled when (1) the Num Lock LED is on and (2) no external keyboard is attached. Note that the
Keypad
system might not notice immediately when an external keyboard is detached.
(Embedded)
NOTE: When Setup is running, this field has no effect—Setup works in the Fn Key Only mode.
Default setting: Fn Key Only.
Allows you to enable or disable the Num Lock LED when the computer boots.
Numlock LED
Default setting: Enabled.
Defines how the BIOS handles the USB devices. USB emulation is always enabled during POST.
USB Emulation
The factory default setting is Enabled.
Allows you to use the
keyboard.
Fn Key Emulation NOTE: USB keyboards cannot emulate the
keyboards will only emulate the
Default setting: Enabled.
Allows you to enable or disable the Fast Boot feature. The following options are available:
l
Minimal — Boot quickly unless the BIOS has been updated, memory changed, or the previous POST did not complete.
Fast Boot
l
Thorough — Do not skip any steps in the boot process.
l
Auto — Allow the operating system to control this setting (this works only when the operating system supports Simple Boot Flag).
Default setting: Minimal
Intel Fast Call for Used in conjunction with iAMT 4.0. Allows users to initiate contact with a management console while residing outside of the corporate
Help
infrastructure (i.e. remote location, behind a firewall or NAT, etc.) Use the check box to enable / disable this feature.
...