Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Notebooks - MX6750 (114.48 kb)
Notebooks - MX6750 (3.62 mb)
Notebooks - MX6750 (963.82 kb)
Notebooks - MX6750 (722.75 kb)
Facilidade de uso
Replacing the Hard Drive Kit
Replacing the Hard Drive Kit
Replacing the hard drive kit
You need a small Phillips screwdriver to replace
To replace the hard drive kit:
the hard drive.
Tools
You need the operating system disc that came
1 If possible, create a Drivers and Applications Recovery
with your notebook.
disc. For more information, see “Creating Drivers
Locating Components
and Applications Recovery discs” in the online User
Guide.
If you cannot create a Drivers and Applications
Recovery disc, Gateway may send you a set of
recovery discs or the replacement hard drive
may already have the drivers and applications
Important
installed. For more information, contact Gateway
Customer Care at the Web address or telephone
number shown on the label on the bottom of the
notebook.
2 Follow the guidelines under “Preventing static
electricity discharge.”
Hard drive
3 Turn off your notebook.
bay
4 Disconnect your notebook from the optional port
replicator.
5 Disconnect the AC adapter, modem cable, and
Preventing static electricity discharge
network cable, if connected to your notebook.
6 Disconnect all peripheral devices connected to your
The components inside your notebook are extremely sensitive
notebook and remove any PC Cards.
to static electricity, also known as electrostatic discharge (ESD).
ESD can permanently damage electrostatic discharge-sensitive
7 Turn your notebook over so the bottom is facing up,
components in your notebook.
then remove the main and optional secondary
batteries. For more information, see “Changing
To avoid exposure to dangerous electrical
Batteries” in your online hardware guide.
voltages and moving parts, turn off your
Warning
notebook and unplug the AC adapter, modem
8 Remove the two hard drive bay cover screws, slide
cable, and network cable before replacing a
the hard drive bay cover, then remove it. The hard
component.
drive is attached to the back of the cover.
Before working with notebook components, follow these
guidelines:
•
Avoid static-causing surfaces such as carpeted floors,
plastic, and packing foam.
•
Remove components from their antistatic bags only when
you are ready to use them. Do not lay components on the
outside of antistatic bags because only the inside of the
bags provide electrostatic protection.
•
Always hold components by their edges. Avoid touching
the edge connectors. Never slide components over any
surface.
•
Wear a grounding wrist strap (available at most electronics
stores) and attach it to a bare metal part of your workbench
or other grounded connection.
•
Touch a bare metal surface on your workbench or other
grounded object.
9 If your new hard drive already includes the hard
drive cover, go to Step 14.
-OR-
If you need to move the hard drive cover from your
old hard drive to your new hard drive, go to Step 10.
Technical Support
© 2006 Gateway, Inc. All rights reserved. Gateway and
See the label on the bottom of the notebook for Customer
eMachines are trademarks or registered trademarks of
Care Information. See your hardware guide for important
Gateway, Inc. in the United States and other countries.
safety, regulatory, and legal information.
All other brands and product names are trademarks or
registered trademarks of their respective companies.
www.gateway.com
1
... Este manual também é adequado para os modelos :
Notebooks - NX560 (4.41 mb)