Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
114101 TABLE OF CONTENTS TABLE OF CONTENTS SECTION 1 ROUGH TERRAIN FORK LIFT SAFETY SECTION 1-1 Introduction 1-3 Standards And Symbols 1-4 Safety 1-5 Training And Knowledge 1-5 Operator's Responsibilities 1-6 Management's Responsibilities 1-7 Maintenance And Repair 1-8 Operation Safety 1-9 SECTION 2 GENERAL SAFETY 2-1 General Safety Procedures 2-3 Jump Starting 2-8 Proper Load Chart Use 2-9 SECTION 3 CONTROLS AND INSTRUMENTS 3-1 Operator's Compartment 3-3 Joystick Control Functions 3-4 Joystick Control Functions (Button Pushed) 3-5 Service Brakes 3-6 Parking Brake 3-6 Frame Sway Control 3-7 Gauges 3-8 Hydraulic Pump Destroke Button 3-8 Steering 3-9 Transmission 3-9 Front Axle Differential Lock 3-10 Front Stabilizers 3-11 Engine Electronic Control Unit (ECU) 3-12 SECTION 4 OPERATION 4-1 Operation And Safety Guidelines 4-3 Before Starting The Engine 4-4 Starting The Engine 4-5 Before Operating The Forklift 4-7 Transporting A Load 4-11 Placing A Load 4-13 SECTION 5 MAINTENANCE PROCEDURES 5-1 General Safety Practices 5-3 Daily Maintenance 5-5 SECTION 6 MATERIAL SAFETY DATA SHEETS 6-1 SECTION 1 ROUGH TERRAIN FORK LIFT SAFETY 1 - 1 TABLE OF CONTENTS SECTION 1 - ROUGH TERRAIN FORK LIFT SAFETY Introduction 1-3 Standards And Symbols 1-4 Safety 1-5 Training And Knowledge 1-5 Operator's Responsibilities 1-6 Management's Responsibilities 1-7 Maintenance And Repair 1-8 Operation Safety 1-9 1 - 2 ROUGH TERRAIN FORK LIFT SAFETY INTRODUCTION ROUGH TERRAIN FORK LIFT SAFETY INTRODUCTION Owners, Users, and Operators: Genie appreciates your choice of our machine for your application. Our number one priority is user safety, which is best achieved by our joint efforts. We feel that you make a major contribution to safety if you, as the equipment users and operators: 1. Comply with OSHA, Federal, State, and Local Regulations. 2. Read, Understand, and Follow the instructions in this and other manuals supplied with this machine. 3. Use Good Safe Work Practices in a common sense way. 4. Only have trained/certified operators – directed by informed and knowledgeable supervision – running the machine. NOTE: OSHA prohibits the alteration or modification of this machine without written manufacturer's approval. Use only factory approved parts to service or repair this machine. If there is anything in this manual that is not clear or which you believe should be added, please contact us. Internet: Email: techpub@genieind.com Thank you! THIS SYMBOL MEANS YOUR SAFETY IS INVOLVED! READ, UNDERSTAND AND FOLLOW ALL DANGER, WARNING AND CAUTION DECALS ON YOUR ROUGH TERRAIN FORKLIFT. 1 - 3 ROUGH TERRAIN FORK LIFT SAFETY STANDARDS AND SYMBOLS ROUGH TERRAIN FORK LIFT SAFETY STANDARDS AND SYMBOLS STANDARDS Many aspects of rough terrain forklift operation and testing are discussed in standards published by the American National Standards Institute. These Standards are updated on a regular basis with addendas. Genie recommends that you purchase and refer to the following standards. ANSI B56.6 – Rough Terrain Fork Lifts This Standard can be purchased from: American National Standards Institute 25 West 43nd Street, 4th Fl. New York, New York, 10036 Tel. 212.642.4900 Fax. 212.398.0023 SYMBOLS The symbols below are used to inform the operator of important information concerning the operation of this machine. DANGER – Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING – Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION – Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. ATTENTION – Indicates a situation which, if not avoided, may result in property or equipment damage. 1 - 4 ROUGH TERRAIN FORK LIFT SAFETY SAFETY ROUGH TERRAIN FORK LIFT SAFETY SAFETY These are general safety rules, which must be followed. You are also required to read and understand the Operator's Manual as there are instructions, which are more detailed specific to this machine. TRAINING AND KNOWLEDGE 1. Safety must always be the operator's most important concern. 2. This machine must only be operated by trained personnel, who have demonstrated their ability to do so safely. 3. Comply with the requirements of current Occupational Safety and Health Administration (OSHA) standards, including 29CFR1910.178; and the American National Standards Institute (ANSI) B56.6 latest edition. 4. Read and Understand all Decals and Warnings. 5. Read and Understand the Rating Chart. 6. Know that the machine can safety lift each load before attempting to lift. 1 - 5 ROUGH TERRAIN FORK LIFT SAFETY OPERATOR'S RESPONSIBILITIES ROUGH TERRAIN FORK LIFT SAFETY OPERATOR'S RESPONSIBILITIES 1. Read and understand the Operator’s Manual. 2. Know the location and the purpose of the controls, instruments and indicator lights. 3. Make sure the machine is in proper order and all operational aids and warning signals are functi...
Este manual também é adequado para os modelos :Equipamento para TC - GTH-1056 (4.08 mb)