Assessments - 5, GPA: 3.4
(
)
)
|
Facilidade de uso
. .................... ......... . .................... ............. . .................. . .................... ............... . .................... ............. ............................ ............................ ............................ ...... ........................(VCC I)..........B................ ............................ ............................ ............................ ....... ............................ .......... ......................... ... ......................... .............. ....................... ............................ ............................ ............................ ............................. ..CS......................... ......... .................... ... ..... ..... • Distance measurement display: 0.5m/yard (<100m/yards) or 1m/yard (.100m/yards) • Easy-to-aim 6x optical observation system • Water and dust resistant • Invisible/Eyesafe FDA Class I Laser/CE Class 1M Laser • 8-second results display • Compact, ergonomic design • Automatic shut-off (after approx. 8 sec. unattended) • Default to “Last Use” settings • 20-second continuous measuring function • Diopter adjustment function for eyeglass wearers • Measuring range Laser 600: 10m/11 yards - 546m/600 yards Laser 500G: 10m/11 yards - 500m/550 yards The Nikon Laser 600, 500G emits invisible, eyesafe, infrared energy pulses that reflect off the selected target back to its optical receiver. Sophisticated precision charge circuitry is used to instantaneously calculate distances, by measuring the time it takes for each pulse to travel from the rangefinder to the target and back. The maximum range of the instrument depends on the reflectivity of the target, its colour, surface finish, size and shape. The following factors ensure best range and accuracy: • Nighttime use • Cloudy weather • Bright-coloured targets • Targets with highly reflective surfaces • Targets with shiny exteriors • Large-size targets • Shooting targets facing at 90 degrees Measurement may result in inaccuracy or failure in the following cases: • Slender or small target • Target has diffusing reflective surface • Target does not reflect the laser beam (glass, a mirror, etc.) • Black target • Target has pronounced depth • In snow, rain or fog • Target measured through glass • Reflective surface measured from diagonal direction • Moving target • Obstacle moving in front of the target • When targeting the surface of water Nomenclature 1Monocular objective lens/ Laser emission aperture 2Laser detector aperture 3MODE button 4POWER button 56x monocular eyepiece 6Eyecup/diopter adjustment ring 7Diopter index 8Strap eyelet 9Battery chamber cover !p Battery chamber cover “Open/Close” indication !q Product number !w Explanatory label !e Laser warning label State of the Internal Display 1. [ ] — Reticle (aiming system) Use to take aim at the target. Position the target at the center of the reticle. 2. [88.8] — Distance/measurement status display Digitally indicates measured distance in meters/yards. Also indicates measuring status such as "Measurement in progress", "Measurement unsuccessful" or "Unable to measure". Display of results: (.100m/yards) e.g. 234m = [ ] Display of results: (<100m/yards)e.g. 76.5yards = [ ] [=] — Now measuring [- - -] — Fail to measure or cannot measure distance 3. [ ] — Indicates distance being measured in meters. 4. [ ] — Indicates distance being measured in yards. 5. [ ] — Indicates battery condition. (See "Changing Batteries") Although the LCD was produced using the most advanced technology, it is impossible to eliminate dust completely. When using this product, the LCD is magnified by high magnification of the eyepiece lens and dust may appear as a defect. It will not, however, affect measurement accuracy. Operational Summary Caution—use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure 1. Install a battery in the battery chamber. (See "Changing Batteries") 2. Diopter adjustment Adjust diopter to obtain a clear image in the LCD. First, rotate the diopter adjustment ring counterclockwise until it comes to a complete stop. Next, turn on the power to activate the LCD when you look through the Laser 600, 500G. Rotate the diopter adjustment ring clockwise until the display comes into focus. If the diopter is not adjusted to correspond to your eyesight, you may not be able to clearly focus your subject. 3. Measuring Note: Depressing and holding down the POWER button causes all symbols to be displayed in the LCD panel. After you remove your finger from the POWER button, the lastused setting is displayed. (If you briefly press the POWER button then remove your finger, the LCD panel may display the last-used setting without displaying all of the symbols. This is not a malfunction or other problem.) 4. Select unit of measurement from m and YD Meters [ ] Yards [ ] Press and hold MODE button for more than 1.5 seconds until the display...
Este manual também é adequado para os modelos :Instrumentos ópticos - Laser 600 (1.09 mb)