Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
You may want to save the box for storing and transporting the unit. Let the unit sit upright for at least 24 hours before powering it on to allow the compressor’s fluids to settle. 2) Place the dehumidifier on a level floor or surface that is strong enough to support the unit with a full bucket of water in a room where the ambient temperature will not drop below 41°F, and away from any heat sources such as direct sunlight, heaters, radiators, dryers, etc. Allow at least 10 inches of space all around the unit and at least 20 inches of space above the unit. 10” 10” 10” 10” If you have multiple power outlets in the room, choose one that is near the dehumidifier and that will be able to provide adequate power to the unit. See the power requirements listed on the product label printed on the side, or on the back of your dehumidifier. 3) Close all windows and doors. To be most effective, use the dehumidifier in a contained room. For example, use it in a room with four walls and a ceiling, instead of a partitioned studio, or warehouse. 4) To activate the unit and ensure the warning switches are engaged, remove the water bucket and reinstall it; otherwise, the unit may not work properly. 5) Plug the unit in to a grounded outlet. (Read the Safety Information section.) 6) When first using the unit, press the Power button on the top of the unit and run it in continuous mode for 24 hours. Note: Dehumidifiers working in a basement will have little or no effect on adjacent enclosed rooms such as closets, unless there is enough circulation of air in and out of the enclosed area. Note: The unit is designed to work in environments with temperatures between 41°F and 95°F Caution: The unit is designed to be used indoors and freestanding, and not be used outdoors, or be built-in to a cabinet or used under a counter. EdgeStar Portable Dehumidifier 4 Control Panel Overview Button Function Power Powers the unit on or off. Continuous Sets the unit to run continuously until the water bucket is full. You will not be able to use the increase/decrease humidity buttons. High Sets the fan speed to high for maximum moisture removal. Normal Sets the fan speed to normal for quieter operation. Increase Increases the desired relative humidity setting. Decrease Decreases the desired relative humidity setting for drier air. Indicator Light Function Power Lights up when the unit is turned on. Continuous Lights up when the unit is set to run continuously until the water bucket is full. High The High Fan Speed indicator light will be lit when you set the fan speed to high. Normal The Normal Fan Speed indicator light will be lit when you set the fan speed to normal. Water Full The water full light will light up red if the unit has filled the water bucket. LCD Display The LCD can display the ambient humidity, the set humidity, and error codes. Power Button Continuous Button High Speed Button Normal Speed Button Indicator Light Set Humidity Buttons LCD Display Note: The unit is not a humidifier; using the increase humidity button will not add moisture to the air. 5 Operating the Control Panel Use the Power button to turn the portable dehumidifier on and off. The LED indicator next to “Power” will light up. By default when you first use the power button, the unit will begin to operate in normal fan speed mode. Note: If the unit was powered off, wait at least 3 minutes before powering it back on. Auto-Restart: If power to the unit is interrupted, the dehumidifier will restart itself in with the last used mode/settings once the power is restored. The compressor will restart after 3 minutes. Auto-Shut Off: The unit will shut off when the set humidity has been reached, or when the water bucket is full, has been removed, or is not in its proper position. Continuous mode dehumidifies the air until the water bucket is full. Use the continuous mode for maximum dehumidification. You will not be able to use the set humidity buttons. To operate the unit in continuous mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button. 3) Press the Continuous button. The LED indicator next to “Continuous” will light up. 4) Select the fan speed by using the Normal or High button. The dehumidifier has two fan speeds. Use the high fan speed for maximum moisture removal. Use the normal fan speed for quieter operation. Select the fan speed by using the Normal or High button. The desired humidity level can be set within a range of 35% Relative Humidity (RH) to 80% RH in 5% increments. To set the desired humidity level percentage: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button. Make sure the continuous light is turned off. 3) Press the Increase and Decrease buttons to set the desired humidity level. After a few seconds, the LCD display will revert to the actual room humidity level with ±5% accuracy. For drier air use the Decrease button. Power Continuous Mode Fan Speeds Setting the Humidity Level Note: Rela...
Este manual também é adequado para os modelos :Dehumidifiers - DEP650EW (278.3 kb)
Dehumidifiers - DEP740EW (278.3 kb)