Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
Each channel can also be configured for switched-only control of non-dimmable loads. Three CNLDM-6 models are available to support 120, 220, or 277 Volt AC applications. The CNLDM-6 occupies a single module space in any CSTC cabinet. The unit is designed to communicate with the PAC2 or any other 2-Series control system via the Cresnet control network. Simplified termination of all high-voltage wiring to the module is provided via captive screw terminals. Designed for continuous operation, each of the module’s six dimmer channels is controlled by dual back-to-back SCR’s rated at 40 Amps, insuring the highest degree of reliability. Lamp filament buzz and EMI/RFI emissions are minimized through high-performance toroid inductors potted in thermally conductive epoxy on each channel. Low-maintenance convection cooling assures quiet and trouble-free operation. > 6 channels of dimming > For incandescent, magnetic low-voltage, 2-wire fluorescent, forward-phase electronic low voltage, and neon/cold cathode > Switch control of non-dimmable loads > Available for 120, 220, or 277 Volt AC > High-reliability convection-cooled design > Toroid inductors on every channel output > Occupies 1 module space in a CSTC lighting cabinet > Controlled by PAC2 or PAC2M automation control system AVAILABLE MODELS CNLDM-6 6 Channel Dimmer Module, 120V CNLDM-6 220V 6 Channel Dimmer Module, 220V CNLDM-6 277V 6 Channel Dimmer Module, 277V SPECIFICATIONS Load Ratings Dimmer Channels: 6 Per Channel: 16 Amps Module Total: 96 Amps Load Types: Incandescent, Non-Dimmable Fluorescent, 2-Wire Dimmable Fluorescent, Neon/Cold Cathode, Magnetic Low Voltage, Forward Phase Electronic Low Voltage Power Requirements Line Power: 120, 220 or 277 Volts AC, 50-60Hz, single-phase, all feeds must be same phase Crestron CNLDM-6 6 Channel Dimmer Module Connectors NET: (1) 4-pin 5mm detachable terminal block, Cresnet slave port Connects to Cresnet control network LINE 1 - 6: (6) Captive screw terminals, line power inputs LOAD 1 - 6: (6) Captive screw terminals, channel outputs NEUT: (1) Captive screw terminal, neutral Controls ID CODE: (2) Rotary DIP Switches, set Cresnet ID DIM/NON-DIM: (1) 6-position DIP switch, selects configuration for each channel NORMAL/OVERRIDE: (1) Slide switch, OVERRIDE forces all channels to full on LED Indicators NET POWER: (green) Indicates DC power supplied from Cresnet network ACTIVITY: (red) Indicates communication with Cresnet system OUTPUTS 1 – 6: Indicate state of each channel Environmental Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: 925 BTU/Hour at maximum load Enclosure Gray metal surface mount module, convection cooled Occupies 1 module space in any CSTC cabinet Dimensions Height: 14.50 in (36.83 cm) Width: 6.00 in (15.27 cm) Depth: 7.07 in (17.94 cm) Weight 12.0 lb (5.44 kg) The CNLDM-6 dimmer module provides 6 independent channels of dimming for incandescent, magnetic low-voltage, forward phase electronic low voltage, 2-wire fluorescent, and neon/cold cathode loads. Each channel can also be configured for switched-only control of non-dimmable loads. Three CNLDM-6 models are available to support 120, 220, or 277 Volt AC applications. The CNLDM-6 occupies a single module space in any CSTC cabinet. The unit is designed to communicate with the PAC2 or any other 2-Series control system via the Cresnet control network. Simplified termination of all high-voltage wiring to the module is provided via captive screw terminals. Designed for continuous operation, each of the module’s six dimmer channels is controlled by dual back-to-back SCR’s rated at 40 Amps, insuring the highest degree of reliability. Lamp filament buzz and EMI/RFI emissions are minimized through high-performance toroid inductors potted in thermally conductive epoxy on each channel. Low-maintenance convection cooling assures quiet and trouble-free operation. > 6 channels of dimming > For incandescent, magnetic low-voltage, 2-wire fluorescent, forward-phase electronic low voltage, and neon/cold cathode > Switch control of non-dimmable loads > Available for 120, 220, or 277 Volt AC > High-reliability convection-cooled design > Toroid inductors on every channel output > Occupies 1 module space in a CSTC lighting cabinet > Controlled by PAC2 or PAC2M automation control system AVAILABLE MODELS CNLDM-6 6 Channel Dimmer Module, 120V CNLDM-6 220V 6 Channel Dimmer Module, 220V CNLDM-6 277V 6 Channel Dimmer Module, 277V SPECIFICATIONS Load Ratings Dimmer Channels: 6 Per Channel: 16 Amps Module Total: 96 Amps Load Types: Incandescent, Non-Dimmable Fluorescent, 2-Wire Dimmable Fluorescent, Neon/Cold Cathode, Magnetic Low Voltage, Forward Phase Electronic Low Voltage Power Requirements Line Power: 120, 220 or 277 Volts AC, 50-60Hz, single-phase, all feeds must be same phase Crestron CNLDM-6 6 Channel Dimmer Module Cresnet Power Usage: 1 Watt (0.042 Amp @ 24 Volts DC) | 800.237.2041Specifications subject to chan...