Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
- Letting colours change automatically. Sweep your finger around the colour wheel (one full circle) and briefly press "I" ("On"); LivingColors will switch to the automatic colour-changing mode and the lamp will start changing colours automatically. You can adjust the speed at which colours change. Speed can be adjusted clockwise, from fast (dark blue colour on the colour wheel) to slow (purple). You can tap anywhere on the colour wheel. While in the automatic colour-changing mode, you can also adjust the saturation and brightness of the colours. To switch back to static colour mode, sweep around the colour wheel again and then press "0". Alternatively, you can switch LivingColors off ("0") and on ("I") again. - If you like a particular light setting (for example, red slightly dimmed), you can store this scene for easy recall: press and hold one of the Scene buttons until the remote control makes a beeping sound. Your scene is now stored under the Scene button you have pressed. You can also store a certain speed of automatic colour-changing mode in this way. You can continue adjusting the lights as you wish. Whenever you want to go back to your stored scene, just press the Scene button you pressed when storing it. That Scene button will light up briefly to show that the scene is selected, and the LivingColors will go to your stored settings. You can store up to 3 scenes (one for each Scene button). Switch off LivingColors by pressing the "0" (off) button briefly. LivingColors will remember your last setting for the next time you use it. To switch it on again, press "I" (on). 3. Connect LivingColors to other Philips LivingAmbiance products You can connect different products from the Philips LivingAmbiance range to the remote control of your LivingColors. This way, you will be able to adjust all the connected products together or each of them individually – all with the same remote control. 1. You can connect other Philips LivingColors lamps to your remote control. Most Philips LivingColors will work with this remote: just check if there is a SmartLink logo on the LivingColors you would like to link. All products with a SmartLink logo can be connected to your remote control. To add a Philips LivingColors lamp to the remote control, bring the remote close to the lamp, then press and hold the "I" button. The lamp will flash 3 times. Hold the "I" button until you hear a beep from the remote; the lamp will shortly flash in green. It is now connected to the remote control and will turn to its last "on" setting. For a LivingAmbiance lamp, please make sure that you also connect the white light. You can do this in the same way as LivingWhites products described in point 2. If you would like to disconnect a LivingColors lamp from the remote, bring the remote close to the lamp, then press and hold the "0" button. The lamp will flash 3 times. Hold the "0" button until you hear a beep from the remote. The lamp will now slowly fade to off. 2. You can also connec...
Este manual também é adequado para os modelos :Iluminação - 6917630PH (5.63 mb)
Iluminação - 6917548PH (5.63 mb)
Iluminação - 6917530PH (5.63 mb)