Log:
Assessments - 4, GPA: 4 ( )

Instruções de Operação Black & Decker, Modelo Power Series 90558474

Fabricante : Black & Decker
Arquivo Tamanho: 651.68 kb
Arquivo Nome : be2e8868-0517-4b22-baa7-5dff4dd9c702.pdf
Língua de Ensino: enesfr
Ir para baixar



Facilidade de uso


• To reduce risk of damage to plug and cord, pull • Use of improper extension cord could result in • Use only the supplied chargers when charging this spotlight or create a hazardous condition. • Use only one charger when charging. • Do not attempt to charge the unit if the charger plug is damaged— • Do not attempt to open the charger. There are no customer serviceable parts inside. Return to manufacturer for repair. • All ON/OFF switches should be in the OFF position when the unit is switches are in the OFF position before connection to a power source or load. • After charging/recharging, disconnect charger or extension cord and wait • This unit contains a non-spillable battery. To avoid possible damage that may shorten the unit’s working life, protect it from direct sunlight, direct heat and/or moisture. • FIRST AID – SKIN: If battery acid comes in contact with skin, rinse immediately with water, then wash thoroughly with soap and water. If redness, pain, or irritation occurs, seek immediate medical attention. EYES: If battery acid comes in contact with eyes, flush eyes immediately, for a minimum of 15 minutes and seek immediate medical attention. IMPORTANT: • This unit is delivered in a partially charged state. Fully charge unit for 18-24 hours using the AC method before using for the first time. Green indicator will light when fully charged. • Read And Understand This Instruction Manual Before Using This Unit. SAVE THESE INSTRUCTIONS INTRODUCTION Thank you for choosing the Black & Decker ® V- 2 Million Power Series ™ Spotlight. Please read this guide carefully before use to ensure optimum performance and to avoid damage to the unit. FEATURES • Powerful, focused quartz halogen beam with Dimmer Switch for high and low settings • Safety cap protects 120 volt AC charger • Comfortable pistol grip, handle and carry lanyard • Charge Status LED Indicator • UL listed, built-in 120 volt AC charger that works with a standard household extension cord (not included) • 12 volt DC charging adapter included • Rechargeable, non-spillable, sealed lead acid battery Controls and Functions CHARGE STATUS LED INDICATOR 120 VOLT AC CHARGER (BACK OF UNIT) CARRY LANYARD QUARTZ HALOGEN BULB ON/OFF TRIGGER DIMMER SWITCH TRIGGER LOCK PISTOL GRIP HANDLE12 VOLT DC CHARGING PORT (UNDERSIDE OF UNIT) CARRY HANDLE 4 CHARGING/RECHARGING This unit is shipped in a partially AC Charger for 18-24 hours or until the green Battery Status LED Indicator lights. Charge Status LED Indicator lights. Charging/Recharging Using the ACCharger and a Standard HouseholdExtension Cord (not included) CHARGE STATUS LED Plug a standard North American 120 volt AC extension INDICATORS cord (not included) into the 120 Volt AC Charger on the back of the unit. Make sure the Spotlight is OFF (the Trigger Lock is in the OFF position and the Trigger is not depressed) . BUILT-IN 120V AC CHARGER Charge for 18-24 hours or until the green Battery Status LED Indicator lights. Notes: To extend battery life, disconnect the charger after 48 hours. All batteries lose charge with time, especially when they are warm. Recharge two months for 18-24 hours when not in frequent use. If the unit is not going to be used for extended periods, disconnect the charger and place. Charging/Recharging Using the 12 Volt DC Charging Adapter Plug the barrel tip of the supplied 12 Volt DC Charging Adapter into the 12 Volt DC Charging Port (shown in the illustration below). 12 VOLT DC CHARGING PORT (UNDERSIDE OF UNIT) 12 VOLT DC CHARGING ADAPTER Insert the 12 volt DC plug end into the accessory outlet of your vehicle or other 12 volt DC power source. Make sure the Spotlight is OFF (the Trigger Lock is in the OFF position and the Trigger is not depressed). Charge until the green Charge Status LED Indicator lights. Notes: When using a vehicle’s 12 volt DC accessory outlet as a charging source, be aware that some vehicles require you to turn on the ignition to power the accessory outlet. To avoid deeply discharging your vehicle battery we recommend to have the vehicle running while recharging the light with the DC recharge adapter. WARNING: NEVER ATTEMPT TO USE THE AC CHARGER AND DC CHARGING PORT SIMULTANEOUSLY. OPERATING INSTRUCTIONS The Trigger Switch is located on the front of the pistol-grip handle of the spotlight (refer to the “Controls and Functions” illustration). • Turn on the Spotlight by squeezing the ON/OFF Trigger. • Turn off the Spotlight by releasing the ON/OFF Trigger. To lock the Trigger in the ON position for continuous operation, squeeze the ON/OFF Trigger and slide theTrigger Lock Button located on the side on the handle DOWN (refer to the “Controls and Functions” illustration). The Spotlight will stay ON until you slide the Trigger Lock Button back UP. Dimmer Switch The Dimmer Switch is located on the top of the Spotlight (refer to the “Controls and Functions” illustration). Sliding the switch forward (toward the Spotlight bulb) sets the Spotlight on High Beam; sliding the switch...

Este manual também é adequado para os modelos :
Iluminação - Power Series V-2 Million (651.68 kb)
Iluminação - Power Series SL302B (651.68 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias