Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
02- The fitting is not suitable for installation in bathrooms at least not in the specified zone. 03- The fitting is suitable for fixing to normal flammable surfaces. Recessed luminaires should under no circumstances be covered with insulation material or other similar materials. 04- Protection class I: the fitting has an earthing connection. The earth wire (yellow/green) has to be connected to the clip marked with . 05- Protection class II: the fitting is double insulated and must not be connected to an Earth. 06- Protection class III: the fitting is only suitable for very low voltage supply (e.g. 12V). 07- X-connection: In case of damage to the wire, it has to be replaced by a wire of the same type. Y-connection: In case of damage to the wire, it has to be replaced only by the manufacturer, distributor or by an expert, to avoid risks. Z-connection: The wire can’t be replaced. 08- This product is not suitable for children under 14 years. 09- This product is not suitable for children under 3 years. The lighting fitting – as well as all other products from the collection – is designed, produced and tested in accordance with the strictest European safety standards (EN 60.598 /). Declaration of conformity: Hereby, Philips Lighting, BG Consumer Luminaires declares that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: Satenrozen 13, 2550 Kontich – Belgium Electric, Magnetic and Electromagnetic Fields ("EMF")1. Philips Lighting manufactures and sells many products targeted at consumers, which, like any electronic apparatus, have the ability to emit and receive electromagnetic signals.2. One of Philips' leading Business Principles is to take all necessary health and safety measures for our products, tocomply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. 3. Philips is committed to developing, producing and marketing products that cause no adverse health effects. 4. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. 5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips toanticipate further developments in standardisation for early integration in its products. In case of construction faults or material damages the manufacturer gives a guarantee up to 2 years for indoor lighting and outdoor lighting. (unless otherwise stated on the packaging) Broken glass, batteries and lighting bulbs do not fall under the guarantee terms. Any damage caused to the light fitting in extreme conditions (coastal areas, industrial surroundings, farm environments) will not be covered by the guarantee. The period of guarantee starts from the purchase date and is only valid on presentation of the receipt. The guarantee is void if the fitting was not installed following the instructions or repaired or modified. The manufacturer does not accept any liability for damage caused as a result of misuse or wrong application of the fitting. Alterations in design and technical specifications reserved. For FAQs and more information on this product, please go to EN SAFETY INSTRUCTIONS - PART B • El fabricante aconseja un uso correcto de los aparatos de iluminacion! Por lo tanto siga siempre estas instrucciones para asegurar un correcto y seguro funcionamiento de las lamparas y conservelas para futuras consultas. • En caso de duda, consulte a un electricista cualificado o a su establecimiento habitual. Asegurese de que siempre se instala la lampara segun las normas pertinentes. Ciertas normas indican que los aparatos de iluminacion deben ser instalados por personal cualificado (p.e. Alemania). • Limpie el interior de las lamparas con un pano seco y limpio, no use disolventes o sustancias abrasivas. Evite el contacto de liquidos en todas las partes electricas. • Si el aparato esta instalado encima de una superficie metalica, esta superficie debe estar conectada a una toma de tierra, o el propio aparato debera estar conectado a una toma de tierra. • Tenga en cuenta siempre todas las especificaciones tecnicas del aparato. Verifique siempre los iconos de la etiqueta gris pegada en la lampara y los iconos en la parte A de las instrucciones de seguridad. • Desecho del producto antiguo: El producto se ha disenado y fabricado con materiales y componentes de alta calidad, que se pueden reciclar y volver a utilizar. Cuando este simbolo de contenedor de ruedas tachado se muestra en un producto indica que este cumple la directiva europea 2002/96/EC. Obtenga informacion sobre la recogida selectiva local de productos electricos y electronicos. Cumpla con la normativa local y no deseche los productos antiguos con los desechos domesticos. El desecho correcto del producto antiguo ayudara a evitar con...