Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 7.7” (195mm)10.23” (260mm) 7.28” (185mm) 8.60” (218.5mm) 8.05” (204.5mm) 4.25” (108mm) 1.57” (40mm) 7.7” (195mm)10.23” (260mm) 7.28” (185mm) 8.60” (218.5mm) 8.05” (204.5mm) 4.25” (108mm) 1.57” (40mm) 9.13” (232mm) 8.27” (210mm) Design LED 108IP Dimensions The Design LED 108IP (DLED 108IP) by Elation Professional is a high output, compact L.E.D. color changer featuring full RGB color mixing using 36 Luxeon K2 LED’s - 12 RED, 12 BLUE an

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 Design LED 12 Brick Dimensions The Design LED 12 Brick (DLED 12 Brick) by Elation Professional is a high output LED color changer panel equipped with 12 x 1 watt Luxeon LEDs (4 red, 4 green and 4 blue) featuring seamless RGB color mixing and infinite color possibilities. Effects for this unit include macros, 0-100% dimming, strobe effect of 1-18flashes per second and a standard beam angle of 44° with 76 LUX, 7 FC at 3 meters. The desi

For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly. Every person involved with the installation, operation and maintenance of this device has to: -be qualified -follow carefully the instructions of this manual INTRODUCTION: Thank you for having chosen this

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 6.6” (167.5mm)8.95” (227.5mm) 12.69” (332.5mm) 14.27” (362.5mm) 16.31” (414.5mm) Design LED 36 Tri-Brick Dimensions The Design LED 36 Tri-Brick (DLED 36 Tri-Brick)by Elation Professional is a high output, compact (fits in 12” box truss), LED color changer featuring seamless RGB color mixing using 12 x “Tri-color” 3W LEDs, 36 Watts total - 12 Red, 12 Blue and 12 Green. This unit is convection cooled and provides up to 50,000 hours esti

27 Design Spot 575B™ Design Spot 575B™ the fixture will lock into the last DMX signal it received and remain in that position until it is turned off or begins receiving a new DMX signal. If the fixture is turned on without any DMX signal, the fixture will automatically go in to sound-active mode. Available settings are: “Close” – Shutter flags will close. “Hold” – Fixture will remain at it’s last settings. “Auto Program” – Fixture will go into stand-alone mode, running the built-in program. “Mus

Step 3 – Playing a Program To initiate a program follow the procedure below: • Access the main menu and use the “Up” and “Down” to toggle to “Function Mode” and tap the “Enter” button. • In the next screen select “Auto Program” and tap the “Enter” button. • There are now two selections, “Master” and “Alone.” Select “Master” when running multiple fixtures in a master/slave configuration. See section 11.2 “Master/ Slave Operation” on page 37 for proper set-up instructions. Select “Alone” when runn

via DMX Auto run if no DMX Pan Reverse movement Tilt Reverse movement Fine resolution switch Pan Degree Select Movement Feedback switch Movement Mode Select Sensitivity of Mic. Service Setting Service Password Fan Voltage Password=XXX High/Low Service Code“=050” Fan Voltage Select Fans Control Auto Fans Speed High Fans Speed Low Fans Speed Fans Speed Mode Select Display Setting Shutoff Time Display shutoff time Temperature C/F Celsius Fahrenheit Temperature switch between C°/F° Initial Effect PA

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 DESIGN LED 72MKII™ ©Elation Professional, Los Angeles Ca. 32 14. DIMENSIONAL DRAWINGS 14.8” / 377 mm 12.6” / 319 mm 2.4” / 61 mm 12” / 304 mm 6.7” / 171 mm 13” / 320 mm 7.75” / 197 mm 13.4” / 341 mm Available case colors: black/silver Design LED Panel 72IP MKII Dimensions The Design LED Panel 72IP MKII (DLED Panel 72 MKII) by Elation Professional is a high output, outdoor color L.E.D. wash panel equipped with 72 3W Luxeon K2 L.E.D.’s

Contact customer support for further instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious damage. Fuse Replacement: Disconnect the unit’s main power. Insert a standard flat head screw driver in to the fuse holder housing. Turn the screwdriver in counterclockwise direction to remove the fuse holder. Remove the old fuse and discard it, replace the fuse with the same type. Insert the fuse holder back into it’s housing and turn in clockwise direct